Cuisinart FP-14 manual Important Unpacking Instructions

IMPORTANT UNPACKING INSTRUCTIONS

This package contains a Cuisinart Elite Collection® 14-Cup Food Processor and the accessories for it: 14-, 11- and 4.5-cup work bowls, work bowl cover, metal chopping/mixing blade, dough blade, adjustable slicing disc, reversible shredding disc, stem adapter, large and small pushers, spatula, accessory storage case, cleaning tool and instruction/recipe book.

CAUTION: THE CUTTING TOOLS HAVE VERY SHARP EDGES. To avoid injury when unpacking the parts, please follow these instructions.

1.Place the box on a low table or on the floor next to the kitchen counter where you intend to keep the food processor. Be sure the box is right side up.

2.Open top flaps—there will be a rectangular block of foam that holds the processor parts, each fitted into a cavity in the foam.

3.Remove the instruction/recipe book, cleaning tool and bowl cover (A) from one side of the foam block. Lift out the large and small pushers.

4.Lift out the work bowls (B) and spatula (C) from the other side of the foam block.

5.Remove the foam block and the cardboard frame.

6.Remove the housing base (D) from one side of the bottom of the box. Assemble the work bowls on the base by placing them over the shaft and using the handle to turn the work bowl counterclockwise to lock it.

7.Place the food processor on the counter or table. Read the Assembly and Operating Instructions thoroughly before using the machine.

8.The storage case (E) is on the other side of the bottom of the box.

9.Lift out the storage case, unlock the cover

and remove the foam block; the small metal chopping/mixing blade (F), dough blade (G), large metal chopping/mixing blade (H), and stem adapter (I), are each in a cavity. CAREFULLY REMOVE THE

METAL CHOPPING/MIXING BLADE BY GRASPING THE CENTER WHITE HUB AND LIFTING IT STRAIGHT UP.

NEVER TOUCH THE BLADES, AS THEY ARE RAZOR SHARP.

10.Pull out the drawer to the storage case with the adjustable slicing disc (J), and

CAREFULLY REMOVE IT BY USING THE PLASTIC HUB. DO NOT TOUCH THE BLADE, IT IS VERY SHARP. The reversible shredding disc (K) is also in the drawer. Carefully remove the slicing disc and shredding disc by using the plastic hub. Remember to lock the parts in the storage case when not in use.

11.Save the shipping cartons and plastic foam blocks. You will find them very useful if you need to repack the processor for moving or other shipment.

NOTE: We recommend that you visit our website, www.cuisinart.com for a fast, efficient way to complete your product registration.

A

B

C

E

D

Storage Cover with Lock

G

F

Drawer

H

KI

J

3