Technical

7.Problem: Nub of dough forms on top of blade and does not become uniformly kneaded.

Solution:

r4UPQNBDIJOFDBSFGVMMZSFNPWFEPVHI divide it into 3 pieces and redistribute them evenly in the work bowl.

8.Problem: Dough feels tough after kneading.

Solution:

rDivide dough into 2 or 3 pieces and redistribute evenly in bowl. Process 10 seconds or until uniformly soft and pliable.

9.Problem: Dough is too dry.

Solution:

r8IJMFNBDIJOFJTSVOOJOHBEEXBUFS tablespoon at a time until dough cleans the inside of the bowl.

10. Problem: Dough is too wet.

Solution:

r8IJMFNBDIJOFJTSVOOJOHBEEGMPVS tablespoon at a time until dough cleans the inside of the bowl.

1. Problem: The motor does not start.

Solution:

r5IFSFJTBTBGFUZJOUFSMPDLUPQSFWFOUUIF motor from starting if it is not properly assembled. Make sure the work bowl and work bowl cover are securely locked into position.

r*GZPVBSFTMJDJOHPSTISFEEJOHBOEUIF above solution does not work, make sure that the food contents in the feed tube are cut below the maximum fill line so that the activation rod can engage the motor.

r*GUIFNPUPSTUJMMXJMMOPUTUBSUDIFDLUIF power cord and outlet.

2.Problem: The food processor shuts off during operation.

Solution:

r5IFDPWFSNBZIBWFCFDPNFVOMPDLFE check to make sure it is securely in position.

r"TBGFUZQSPUFDUPSJOUIFNPUPSQSFWFOUTUIF motor from overheating, which is caused by excessive strain. Press the Off control button and wait 10 to 15 minutes to allow the food processor to cool off before resuming.

3.Problem: The food processor cover becomes unlatched in the back and/or makes a loud noise.

Solution:

r5IFCBDLPGUIFDPWFSCFDPNJOHVOMBUDIFE and any related noise, will not prevent the unit from working. Simply push down to lock the back into position.

4.Problem: The motor slowed down during operation.

Solution:

r5IJTJTOPSNBMBTTPNFIFBWJFSMPBET FH slicing/shredding cheese) may require the motor to work harder. Simply reposition the food in the feed tube and try again.

r5IFNBYJNVNMPBEDBQBDJUZNBZIBWFCFFO exceeded. Remove some of the ingredients and continue processing.

5.Problem: It is difficult to remove the chopping/mixing blade from the work bowl.

Solution:

r5IFTFJOOPWBUJWFCMBEFTIBWFCFFO designed to lock in the work bowl to prevent them from falling out when emptying the contents of the bowl. Using extreme care, use a little extra force to remove the blade.

6.Problem: The food processor vibrated/ moved around the countertop during processing.

Solution:

r.BLFTVSFUIFSVCCFSGFFUBUUIFCPUUPNPG the unit are clean and dry. Also make sure that the maximum load capacity is not being exceeded.

r5IJTJTOPSNBMBTTPNFIFBWJFSMPBET FH slicing/shredding cheese) may require the motor to work harder.

7.Problem: The large pusher falls out when the cover is turned upside down.

Solution:

r5IFQVTIFSMPDLGFBUVSFMPDBUFEBCPWFUIF handle, should be pulled out.

Cuisinart FP-14 manual Technical

Models: FP-14

Solution:

Solution:

Solution:

Solution:

Technical

Solution:

Solution:

Solution:

Solution:

Solution:

Solution:

Solution: