Setting the EXT. IN Setup

• Set the EXT. IN terminals playback method.

1 Press the CURSOR D or H button to select “EXT. IN Setup” at the “Audio Input Setup” menu, then press the ENTER button.

• The “EXT. IN Setup” screen appears.

2 Press the CURSOR D or H button to select the input terminal, then press the ENTER button.

• Switch to the setting screen.

3 Press the CURSOR D or H button to select the item to be set, then press the CURSOR F or G button to select the parameter.

Mode:DSP:

The analog input signal is converted into a digital signal and undergoes DSP processing.

System Setup settings (Speaker Configuration, Delay Time, etc.) are reflected in the same way as for other input signals.

The surround playback mode button functions.

ANALOG:

The analog input signal is played without DSP processing.

SW and center channel: Down-mixing is conducted by the analog circuit. Surround and surround back channels: Not output if “No” is selected at the Speaker Configuration. Delay Time: Not reflected.

S. Back:

Set when “Mode” is set to “DSP”. Select according to the specifications of the player being used. Also refer to the player’s operating instructions.

NOT USED:

Select when neither SBL or SBR is connected.

SB (SBL):

Select when only one surround back channel (SBL) is connected.

SBL/SBR:

Select when two surround back channels (SBL and SBR) are connected.

Advanced Setup – Part 1

Surr. B:

Select according to the specifications of the player being used. Also refer to the player’s operating instructions.

NOT USED:

Select when Surround B is not terminals.

The Surround A input signal is output to the Surround B output terminals.

USED:

Select when Surround B is connected. The playback in the MULTI CH DIRECT and MULTI CH IN is only possible when “Mode” is set to “DSP”.

Surr. Sp :

Set when “Mode” is set to “ANALOG”. Select according to the specifications of the player being used. Also refer to the player’s operating instructions.

Surr. A

Select when using surround speakers A.

Surr. B

Select when using surround speakers B.

Surr. A+B

Select when using both surround speakers A and B.

SW Level :

Select according to the specifications of the player being used. Also refer to the player’s operating instructions.

Set the level of playback of the analog input signal connected to the EXT. IN Subwoofer.

+15dB (default) recommended. (0, +5, +10 and +15 can be selected.)

INPUT ATT.:

Set when “Mode” is set to “DSP”.

If “OVER LOAD” appears on the display, select “–6 dB”.

4

Press the ENTER button to enter the setting.

 

 

• The “EXT. IN Setup” menu reappears.

5 Press the CURSOR D or H button to select the “Exit”, then press the ENTER button.

The “Audio Input Setup” menu reappears.

The items to be set differ as described below according to the selected input terminal and the “Mode” selection.

 

EXT. IN-1 (10 CH)

 

Mode

DSP

 

ANALOG

Surr. B

NOT USED / USED

 

NOT USED / USED

S. Back

NOT USED, SBL/SBR, SB (SBL)

 

Surr. Sp

 

Surr. A / Surr. B / Surr. A+B

SW Level

0, +5, +10, +15 dB

 

0, +5, +10, +15 dB

Input ATT.

OFF, –6 dB

 

 

 

 

 

 

EXT. IN-2 (6 CH)

 

Mode

DSP

 

ANALOG

Surr. B

 

S. Back

 

Surr. Sp

 

Surr. A / Surr. B / Surr. A+B

SW Level

0, +5, +10, +15 dB

 

0, +5, +10, +15 dB

Input ATT.

OFF, –6 dB

 

 

 

 

 

105