Advanced Operation

Multi zone power indicators

Remote control unit operations during multi-source playback

1 Select the zone which you want to operate pressing the AMP buttons.

2 Press the ON button to turn on the Zone power.

• The multi zone power indicator light.

Press the OFF button to turn off the zone power. The multi zone power indicator on main unit is off.

3 Press the FUNCTION button to select the input function you wish to operate.

(ZONE2)

AMP

 

INPUT MODE

ON/OFF

 

 

TEST TONE

SYSTEM SETUP

 

 

CURSOR

CH SEL/ENTER

ON SCREEN

VIDEO SELET VOLUME MUTE

FUNCTION

(ZONE3/4)

AMP

4 Select the input mode. (only ZONE2 mode): Press the INPUT MODE button to switch to the input.

AUTO ANALOG

5 The volume of the outputs of the different zones can be adjusted with the VOLUME button on the remote control unit.

MUTE

ON/OFF

VOLUME

The output level can be controlled only if the zone volume level is set “variable” at “Volume Control” in

the “System Setup Menu” ( page 134). Default volume setting

ZONE2 : –40 dB

ZONE3 : –40 dB

ZONE4 : –40 dB

The Zone volume can be adjusted within the range of –80 to 18 dB, in steps of 1 dB.

However, when using with ZONE2 set to multi-channel (5.1 or 7.1 channel), the ZONE2 volume can be

adjusted in steps of 0.5 dB ( page 126 ~ 128).

The MUTE button can be operated in the same way as for the

MAIN ZONE ( page 45).

In the ZONE2 mode, the VIDEO SELECT and ON SCREEN buttons can be operated in the same way as for the MAIN

ZONE ( page 45, 46).

FUNCTION

94