Memory backup and protecting the setting2User Memory

This stores the current user settings in the memory.

1 Press the CURSOR D or H button to select “Setup Memory / Lock” at the “Option Setup” menu, then press the ENTER button.

• The “Setup Memory / Lock” screen appears.

2 Press the CURSOR D or H button to select “User Memory”, then press the ENTER button.

• Switch to the “User Memory” screen.

3

Press the CURSOR F button to select “Save Yes”.

 

 

• About 30 seconds are required for the settings to be

 

stored in the memory.

 

Once the settings are stored in the memory,

 

“Load” is displayed and the settings can be loaded.

 

 

 

 

4 Press the CURSOR D or H button to select “Exit”, then press the ENTER button.

• The “Setup Memory / Lock” screen reappears.

Advanced Setup – Part 1

2Setup Lock

This sets whether or not to lock the system setup settings so that they cannot be changed.

Once all the settings are made, set “Setup Lock” to “ON”.

1 Press the CURSOR D or H button to select “Setup Lock” at the “Setup Memory / Lock” screen, then press the ENTER button.

• Switch to the “Setup Lock” screen.

2 Press the CURSOR F button to select “ON”, to lock the system setup settings, then press the ENTER button.

When the setup lock function is activated, the settings listed below cannot be changed, and “SETUP LOCKED!” is displayed when related buttons are operated.

System setup settings

Surround parameter settings

Tone control settings

Channel level settings (including test tones)

Room EQ

To unlock, press the SYSTEM SETUP button again and display the “Setup Lock” screen, then select “OFF” and press the ENTER button.

137