Advanced Setup – Part 1

2Audio Delay (ZONE2)

Set the delay time the sound is synchronized with the picture which are output in ZONE2.

1 Press the CURSOR D or H button to select “Audio Delay” at the “Video Setup” menu, then press the ENTER button.

• The “Audio Delay” screen appears.

 

 

Press the CURSOR F or G button to set the

2 delay time (0 ms ~ 200 ms).

 

 

With a movie source, for example, adjust so that the

 

 

movement of the actors’ lips is synchronized with the

 

 

sound.

 

 

 

3

Press the ENTER button to enter the setting.

 

 

 

 

• The “Zone Setup” menu reappears.

Setting the ZONE3 and ZONE4 tone control and channel level

Adjust the tone and channel level of the sound output from ZONE3 and ZONE4.

1 Press the CURSOR D or H button to select “Zone3/4 Tone/Ch Lev.” at the “Zone Setup” menu, then press the ENTER button.

• The “Zone3/4 Tone/Ch Lev.” screen appears.

2 Press the CURSOR D or H button to select the zone whose sound you want to adjust (ZONE3, ZONE4), then press the ENTER button.

• Switch to the setting screen.

Example: When “Zone3” is selected

3 Press the CURSOR D or H button to select the item to be set, then press the CURSOR F or G button to adjust the parameter.

Bass:

Adjust the tone for the bass. (The bass sound can be adjusted between –12 dB and +12 dB in steps of 2.0 dB.)

Treble:

Adjust the tone for the treble. (The treble sound can be adjusted between –12 dB and +12 dB in steps of 2.0 dB.)

HPF:

Set this to “ON” if your speakers do not have a very strong capacity for producing low bass. Using the high pass filter makes it possible to reduce distortion of the bass sound.

Channel Level:

Set so that the playback level is the same for the left and right channels. (The volume can adjusted between –12 dB and +12 dB in steps of 1.0 dB.)

4 Press the ENTER button.

• The “Zone3/4 Tone/Ch Lev.” screen reappears.

Use the same procedure to make the settings for ZONE4.

124