Advanced Setup – Part 2

3 Press the CURSOR D or H button to select “Test Tone Start”, then press the CURSOR F button to select “Yes”.

4

-2

When “Manual” mode is selected:

Press the CURSOR D or H button to select the speaker, then press the CURSOR F or G button to adjust all the speakers to the same volume.

Example: “Manual” mode is selected.

4

-1

When “Auto” mode is selected:Press the CURSOR F or G button to adjust all the speakers to the same volume.

•The test tones are emitted from each speaker in the following order, at 4 seconds intervals the first time and second time around, 2 seconds intervals the third time around and on:

FL C FR SRASRB

2spkrs

SWSLASLBSBLSBR

SB 1spkr

When the surround back speaker setting is set to “1spkr” for “Speaker Configuration”, this is set to “SB”.

Example: When the volume is set to –11.5 dB while the test tone is being produced from the Front L ch speaker

The volume can be adjusted between –12.0 dB and +12.0 dB in units of 0.5 dB.

5

Press the ENTER button to enter the setting.

 

 

• The “Channel Level” screen reappears.

• To cancel the settings, press the CURSOR F button to select “Level Clear” and “Yes” on the “Channel Level” screen, then make the settings again.

144