Advanced Setup – Part 1

Option Setup

• Make other expert settings.

Setting the Channel Setup

•With this setting it is possible to change the number of channels played in the different zones according to the purpose.

The AVR-5805CI is equipped with pre-out terminals for a total of 22 channels.

16 channel of these pre-out terminals can be assigned between the MAIN ZONE and ZONE2 (Theater). In addition, up to three channels of subwoofers can be added to the MAIN ZONE, so subwoofers can be set in the front and back or at the sides. The number of channels output from the pre- out terminals exclusively for ZONE2, 3 and 4 can be set to “MONO” or “STEREO” according to the method of playback in the various multi-zones.

2Channel setup flow

Set the number of channels for the MAIN ZONE’s main channel.

Set the number of subwoofer channels for the MAIN ZONE.

1 Press the CURSOR D or H button to select “Option Setup” at the “System Setup Menu”, then press the ENTER button.

• The “Option Setup” menu appears.

2 Press the CURSOR D or H button to select “Channel Setup”, then press the ENTER button.

• The “Channel Setup” screen appears.

The number of channels that can be set for ZONE2 depends of the number of channels in the MAIN ZONE. See the table on page 127.

Set the number of channels for the ZONE2.

Set the number of channels for the ZONE3.

Set the number of channels for the ZONE4.

3 Press the CURSOR D or H button to select the zone, then press the CURSOR F or G button to select the channel setting.

Refer to the table on page 127.

4

Press the ENTER button to enter the setting.

 

 

• The “Option Setup” menu reappears.

126