Denon AVR-5805CI Equalizer curve, then press the ENTER button, 5 Press the CURSOR D or H button to select the, 6 Press the CURSOR F or G button to select the speaker channel

Advanced Setup – Part 2

5 Press the CURSOR D or H button to select theEqualizer curve, then press the ENTER button.

• The “EQ Check” screen appears.

The display is only an approximate picture of the response and that correction is happening at all frequencies.

6 Press the CURSOR F or G button to select the speaker channel.

7 If the check ends, press the CURSOR D or H button to select “Exit”, then press the ENTER button.

• The “EQ Parameter Check” screen reappears.

8 Press the CURSOR D or H button to select “Exit”, then press the ENTER button.

• The “Parameter Check” screen reappears.

9 The results of the “Auto Setup” procedure can be reset even if the settings have been changed after performing the “Auto Setup” procedure: Press the CURSOR D or H button to select “Restore Yes 0”, then press the CURSOR F button.

10 Press the CURSOR D or H button to select “Exit”, then press the ENTER button.

• The “Auto Setup / Room EQ” menu reappears.

11 Press the CURSOR D or H button to select “Exit”, then press the ENTER button.

• The “System Setup Menu” reappears.

152