2Registering

 

Press and hold the RC SETUP button for at
1 least 3 seconds.

 

• The IR segment blinks twice.

 

 

2

Press the 9, 7, 8 button (9 7 8) in that order.

• The IR segment blinks twice and the system call

 

registration mode is set.

3 Press the SYSTEM CALL button (1, 2 or 3) for which you want to register the operations.

4 Press the buttons you want to register in the order of the operations to be performed.

Example:Press the ON button.

Press the CD button of the MODE

SELECTOR button.

Press the 1 button.

The mode can be switched by pressing a MODE SELECTOR button.

5 Repeat steps 3, 4 to register the desired buttons.

6 Press and hold the RC SETUP button for at least 3 seconds.

• The IR segment blinks twice and the setting is completed.

2Operating1 Press the AMP button to select “SYSTEM CALL”.

2 Press the SYSTEM CALL button (1, 2 or 3) at which the operation are registered

• The stored signals are transmitted successively.

Advanced Operation

2

Press the 9, 8, 4 button (9 8 4) in that order.

 

 

• The IR segment blinks twice and the punch through

 

setting mode is set.

 

 

 

Press the MODE SELECTOR button for the device
3 to be punched through (CD, DVD or VCR).

4

Press the button to be punched through (1, 2,

6, 7, 8, 9 or 3).

5 Press the MODE SELECTOR button for the device to be punched through (TV or SAT/CBL).

6 Press and hold the RC SETUP button for at least 3 seconds.

The IR segment blinks twice and the setting is completed.

Setting the back light’s lighting time

 

Press and hold the RC SETUP button for at

1 least 3 seconds

 

 

• The IR segment blinks twice.

2

Press the 9, 7, 3 button (9 7 3) in that order.

 

 

• The IR segment blinks twice and the backlight

 

lighting time setting mode is set.

 

 

 

Press the NUMBER button of (1 to 5) you want
3 to set the lighting time.

 

• The IR segment blinks twice.

 

Lighting time: 1

: 5 sec

 

2

: 10 sec (factory default)

 

3

: 15 sec

 

4

: 20 sec

 

5

: 25 sec

 

 

 

Setting the brightness

The brightness of the display can be adjusted in 5 steps (Default : level 3).

First set the auto brightness adjustment setting to “OFF”.

Setting the punch through function

CD, DVD or VCR mode buttons can be assigned to unused TV and SAT/CBL mode buttons.

For example, when DVD mode operations are assigned to TV mode buttons, the DVD mode can be operated while in the TV mode.

1 Press and hold the RC SETUP button for at least 3 seconds.

• The IR segment blinks twice.

1 Press and hold the RC SETUP button for at least 3 seconds.

• The IR segment blinks twice.

2 Press the CHANNEL button.

• Press the + button to increase the brightness 1 step.

• Press the button to decrease the brightness 1 step.

85