Advanced Setup – Part 1

7

Press the ENTER button to enter the setting.

 

 

• The “Video Setup” menu reappears.

• Audio signals input from the analog and digital terminals are not output to the TV.

• With HDMI, the video and audio signals are transferred simultaneously. When HDMI is assigned to an input source, the digital audio input assignment switches to HDMI along with the video input.

When this setting is made for input sources to which a digital audio input (DENON LINK, IEEE1394 etc.) is previously assigned, the digital audio assignment is set to HDMI.

In this case, reassign the digital input using the procedure

described at “Digital In Assign” ( page 104) and

“IEEE1394 Assign” ( page 107).

Setting the Component In Assignment

This assigns the component (color difference) video input terminals for the different input sources.

1 Press the CURSOR D or H button to select “Component In Assign” at the “Video Setup” menu, then press the ENTER button.

• The “Component In Assign” screen appears.

2 Press the CURSOR D or H button to select the input source, then press the CURSOR F or G button to select the component video input terminal.

Select from among 1-RCA to 5-RCA and 6-BNC.

If the same component video input terminal is selected, the setting for the input source that was previously assigned switches to “NONE”.

When “Default Yes” is selected, then press the CURSOR F button to reset to the default values.

3

Press the ENTER button to enter the setting.

 

 

• The “Video Setup” menu reappears.

Setting the Video Convert Mode

This sets whether or not to use the video conversion function.

1 Press the CURSOR D or H button to select “Video Convert Mode” at the “Video Setup” menu, then press the ENTER button.

• The “Video Convert Mode” screen appears.

2 Press the CURSOR D or H button to select the input source, then press the CURSOR F or G button to select “ON” or “OFF”.

ON:

When there are multiple input signals, the input signals are detected and the input signal to be output from the video monitor output terminal is selected automatically in the following order: component video, S-Video, composite video.

OFF:

The convert function does not operate.

In such cases, the input device’s cable type must be the same as the type of cable connected to the AVR-5805CI’s monitor output terminal (video, S- Video or component video).

3

Press the ENTER button to enter the setting.

 

 

• The “Video Setup” menu reappears.

Down-converting from the component video signal to the S- Video and composite video signal is possible only when the resolution of a component video signal is 480i / 576i.

• When a non-standard video signal from a game machine or some other source is input, the video conversion function might not operate. If this happens, please set the conversion mode to “OFF”.

• When the video conversion function has been used, information such as that of text broadcasts which has been added to the video signal might not be output. If this happens, please set the conversion mode to “OFF”.

112