Troubleshooting

Symptom

 

 

Cause

 

 

 

 

Measures

 

 

Page

 

AVR-5805CI’s

HDMI output

terminals and

• Check the HDMI connection.

 

 

36, 37

 

monitor’s input terminals are not properly

 

 

 

 

 

 

 

 

connected.

 

 

 

 

 

 

 

 

 

 

 

 

• No HDMI/DVI signal is being input.

 

• Properly select

HDMI or DVI

signal input

111, 112

An image is not projected with

 

 

 

 

 

 

source.

 

 

 

 

 

 

• The connected

monitor equipment

or other

• The AVR-5805CI will not output video signal

36, 37

an HDMI/DVI connection.

equipments do not support HDCP.

 

unless the other equipment supports HDCP.

 

 

 

 

 

• The output format of the connected player

• Check whether

the output format of the

36, 37

 

(HDMI/DVI FORMAT) does not matche the

connected

player (HDMI/DVI

FORMAT)

 

 

supported input format of connected monitor

matches the supported input format of

 

 

equipments.

 

 

 

 

connected monitor equipments.

 

 

 

 

 

 

 

 

• The AVR-5805CI does not play HDMI audio

• Set the HDMI audio playback setting at the

111, 112

The HDMI audio is not output.

signals.

 

 

 

 

“HDMI/DVI In Assign” settings to “AMP”.

 

• The HDMI audio signals are not output from

• Set the HDMI audio playback setting at the

111, 112

 

 

the connected monitor device.

 

 

“HDMI/DVI In Assign” settings to “TV”.

 

 

 

 

 

 

• The set’s internal temperature has risen and

• Put the AVR-5805CI in a well-ventilated place.

16

 

the protection circuit has been activated.

• Turn off the power, then wait for the set to

16

 

 

 

 

 

 

 

fully cool off before turning the power back on.

 

Power has turned off and the

• The core wires of the speaker cables are

• Check the connections of all the speaker

16

power indicator is flashing red.

touching each other or the AVR-5805CI’s rear

cables.

 

 

 

 

 

 

 

panel, activating the protection circuit.

 

 

 

 

 

 

 

 

AVR-5805CI is malfunctioning.

 

 

• Turn off the power and contact a DENON

16

 

 

 

 

 

 

 

customer service center.

 

 

 

 

 

 

 

 

 

 

Sound is only produced from the

• You are playing a monaural source (TV, AM

• When playing monaural

sources,

select a

61 ~ 63

radio

broadcast, etc.) in

the DOLBY/DTS

surround

mode

other

than

DOLBY/DTS

 

center speaker.

 

SURROUND or HOME THX CINEMA mode.

SURROUND or HOME THX CINEMA.

 

 

 

 

 

 

 

“CHECK ANTENNA” is displayed

AVR-5805CI’s XM terminal and the XM Mini-

• Check that the connection are correct.

40

in the XM mode.

Tuner and Home Dock is not properly connected.

 

 

 

 

 

 

 

 

 

 

 

 

 

“NO SIGNAL” is displayed in the

• The signal cannot be received.

 

 

• Reposition your XM Mini-Tuner and Home Dock.

71

XM mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“OFF AIR” is displayed in the XM

• The

selected

channel

is

not

currently

• Select the another channel.

 

 

72, 73

mode.

broadcasting.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Receiving only XM channels 0

• The XM Tuner is not activated.

 

 

• Contact XM Satellite Radio.

 

 

71

and 1.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

158