Basic Operation

FUNCTION

TUNING PRESET
MEMORY TUNINGMODE BANDManual tuning

1 Set the input source to “TUNER”.

(Main unit)

(Remote control unit

 

in the AMP mode)

 

 

2 Press the TU (TUNER) button to select the TUNER mode.

(Remote control unit)

3 Watching the display, press the BAND button to select the desired band (AM, FM or XM).

When listening to the XM satellite Radio ( page 71).

4 Press the MODE button to set the manual tuning mode.

Check that the display’s “AUTO” indicator turns off.

5 Press the TUNING button to tune in the desired station.

The frequency changes continuously when the button is held in.

•When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the “STEREO” indicator turns off.

TU

MEMORY BLOCK

TUNING

BAND MEMORY

MODE

 

RDS SEARCH

ON SCREEN

CHANNEL

(AMP mode)

 

NUMBER

TUNER

(AMP mode)

SHIFT

 

Preset memory

 

1 Use the “Auto tuning” or “Manual tuning” operation to tune in the station to be preset in the memory.

2 Press the TU (TUNER) button to select the TUNER mode.

(Remote control unit)

3 Press the MEMORY button.4 Press the MEMORY BLOCK (A to G) button.

The memory block can also be selected by pressing the SHIFT button.

5 Press the CHANNEL button or NUMBER (1 to 8) button to select the desired preset channel.

6 Press the MEMORY button again.

• Store the station in the preset memory.

• To preset other channels, repeat steps 2 to 5.

A total of 56 broadcast stations can be preset — 8 stations (channels 1 to 8) in each of blocks A to G.

66