Denon AVR-5805CI LFE:, LFE+Main:, Zone Setup (ZONE2 = 5.1/7.1ch), Setting the type of speakers for ZONE2, Setting the low frequency distribution for ZONE2

Advanced Setup – Part 1

Zone Setup (ZONE2 = 5.1/7.1ch)

•Make the settings related to surround playback and video for ZONE2.

•Adjust the sound played in ZONE3 and ZONE4.

•When “STEREO” or “MONO” is selected for the ZONE2 channel output setting at “Channel Setup” ( page 126 ~ 128), the menu screen displayed differs. In this case, see the instructions starting at page 125.

Setting the type of speakers for ZONE2	4	Press the ENTER button to enter the setting.
		• The “Zone Setup” menu reappears.

•Set the presence/absence of speaker combinations and the size in function of the low frequency reproduction capabilities when playing surround sound in ZONE2.

1 Press the CURSOR D or H button to select “Zone Setup” at the “System Setup Menu”, then press the ENTER button.

• The “Zone Setup” menu appears.

2 Press the CURSOR D or H button to select “Speaker Config.”, then press the ENTER button.

• The “Speaker Config.” screen appears.

Setting the low frequency distribution for ZONE2

•This selects the subwoofer used in ZONE2 for playing the low base sound.

1 Press the CURSOR D or H button to select “Subwoofer Mode” at the “Zone Setup” menu, then press the ENTER button.

• The “Subwoofer Mode” screen appears.

2 Press the CURSOR F or G button to select the setting.

3 Press the CURSOR D or H button to select the speaker, then press the CURSOR F or G button to select the parameter.

ZONE2 Center Sp.

ZONE2 Front Sp.

ZONE2 Subwoofer

ZONE2 Surround Sp.

(ZONE2 Surround back Sp.)*

LFE:

For any channel(s) that are set to LARGE, low frequencies in that channel’s corresponding source are directed to that loudspeaker only. Low frequencies that are directed to the subwoofer(s) are from the program source LFE channel, and from other channels where the speakers are set to

SMALL.

LFE+Main:

Low frequencies from speaker channels that have been set to LARGE are reproduced from those speakers as well as from the subwoofer(s). Depending upon the characteristics of the LARGE main speakers, this mode may provide a more even low frequency response throughout the listening room.

*This is only displayed when “7.1ch” is selected for the ZONE2 channel output setting at “Channel

Setup” ( page 126 ~ 128).

For a description of the different parameters ( page 141).

3	Press the ENTER button to enter the setting.
	• The “Zone Setup” menu reappears.

• The subwoofer mode setting is only valid when “Large” is set for the ZONE2 front speakers and “Yes” is set for the

120 subwoofer in the “Setting the type of speaker for ZONE2”.