Advanced Setup – Part 1

5 Press the CURSOR D or H button to select “Exit”, then press the ENTER button.

• The “Zone Setup” menu reappears.

6 Press the CURSOR D or H button to select “Exit”, then press the ENTER button.

• The “System Setup Menu” reappears.

2“Zone Setup” setting when ZONE2 is set to “STEREO” or “MONO”

The “Zone Setup” screen shown below is displayed when “STEREO” or “MONO” is selected for the ZONE2 channel setting at “Channel Setup”.

“ZONE2 Tone/Ch Lev.” can be set in the same way as “ZONE3/ZONE4 Tone/Ch Lev.”.

For instructions on the “Video Setup” (item 4) ( page 123, 124).

125