Denon AVR-5805CI STEREO, CURSOR, STANDARD, SURROUND, USER MODE, PARAMETER, 7CH STEREO, CH SEL/ENTER, 2Fader function, 2 Press the CH SEL/ENTER button

Advanced Operation
AMP
USER MODE	STANDARD
STEREO	DSP SIMULATION
	7CH STEREO
CH SEL/ENTER
	CURSOR
SURROUND
PARAMETER

2Fader function

•This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) of ZONE2 together. Use it for example to adjust the balance of the sound from each position when multi-channel music sources are played.

1 Select the ZONE2 mode using the AMP button.

2 Press the CH SEL/ENTER button.

• The “Channel Vol.” screen appears.

3 Press the CURSOR D, H or CH SEL/ENTER button then select “Fader”.

The channel switches in the order shown below each time the CH SEL/ENTER button is pressed.

FL C FR SW SR

FADER SL SBL SBR

ZONE2 surround back speakers are only displayed when “7.1ch” is selected for the ZONE2 channel output setting at “Channel Setup”.

When the ZONE2 surround back speaker setting is set to “1spkr” for “Speaker Configuration”, this is set to “SB”.

4 Press the CURSOR F button to reduce the volume of the front channels, the CURSOR G button to reduce the volume of the rear channels.

The fader function does not affect the SW channel.

•The channel whose channel level is adjusted lowest can be faded to –12.0 dB using the fader function.

•If the channel levels are adjusted separately after adjusting the fader, the fader adjustment values are cleared, so adjust the fader again.

96