Advanced Setup – Part 1

Setting the Power Amplifier Assignment

•With the AVR-5805CI’s 10-channel power amplifier, it is possible to select 10 channels worth of signals (not including the subwoofer signals output from the pre-out terminals) to be output from the speakers. This makes it possible to put together various speaker systems. The channels can be selected freely, so “L1” to “L5” and “R1” to “R5” are indicated on the speaker terminals on the AVR-5805CI’s rear panel.

•The channels for which the power amplifier can be assigned differ according to the channel settings made at “Channel Setup”

( page 126 ~ 128).

2Power amplifier assignment flow

Determine what speaker system configuration you want.

(a)

Signals are output from the speakers with priority for the MAIN ZONE channels.

(b)

Assign the power amplifier to the MAIN ZONE channels set at “Channel Setup”.

Selecting the speaker outputs freely

Using front B

(c)

The number of free power amplifiers depends on the setting at (b).

From (a) to (c) will be done automatically.

Select “Advanced”.

 

Select “Adv+Front B”.

 

 

 

Set what channels to assign the power amplifier to.

Decide what to output to the free power

 

If you do not want to output anything

 

amplifiers at (c).

Select “Normal ”.

Bi-Amp output of

Bi-Amp output of

Output ZONE2

Output ZONE3

Output ZONE4

Output ZONE2/3/4

MAIN ZONE front

MAIN ZONE

 

 

 

 

 

 

 

 

channel only

channels

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Select

 

Select “Bi-Amp”.

 

Select “+Zone2”.

 

Select “+Zone3”.

 

Select “+Zone4”.

 

Select

“Bi-Amp Front”.

 

 

 

 

 

 

 

 

 

“+Zone2/3/4”.

 

 

 

 

 

 

 

 

 

 

 

129