Connecting Other Sources

Connecting a turntable

• You can connect the turntable (MM cartridge) to the PHONO terminals.

Turntable(MM cartridge)

A

L

AUDIO OUT

R

GND

NOTE:

The phono input can accept signals from moving magnet (MM) and high output moving coil (MC) phono cartridges. If your turntable is equipped with a low output MC cartridge, you will need to use a separate MC head amplifier or step-up MC transformer.

If humming or other noise is generated when the ground wire is connected to the SIGNAL GND terminal, disconnect the ground wire.

Connecting a CD recorder or MD recorder

If you wish to perform analog dubbing from a digital source, such as a CD or MD recorder to an analog recorder such as a cassette deck, you will need to connect analog inputs and outputs as shown below, in addition to the digital audio connections.

 

CD recorder /

 

MD recorder

A

 

AUDIO OUT

 

 

L

L

L

 

R

R

R

A

 

AUDIO IN

 

 

L

L

L

 

R

R

R

D

 

 

 

 

OPTICAL

 

 

OUT

D

 

 

 

 

OPTICAL

 

 

IN

NOTE:

Do not connect the output of the component connected to the OPTICAL 5 OUT terminal on the AVR-5805CI’s rear panel to any terminal other than the OPTICAL 5 IN terminal.

34