Advanced Setup – Part 2

This Speaker Setup section describes the procedures to make speaker settings manually (without using the Auto Setup function), as well as to make manual changes to settings that have already been made by the Auto Setup function.

SYSTEM SETUP CURSOR

TEST TONE

SYSTEM SETUP

CURSOR

ENTER

ENTER

Speaker Setup

If the “Auto Setup” procedure has already been performed, there is no need to make this setting.

Perform this setting if you wish to make the settings for your speaker systems manually.

Setting the type of speakers

The composition of the signals output to each channels and the frequency response are adjusted according to the combination of speakers actually being used.

1 Press the CURSOR D or H button to select “Speaker Setup” at the “System Setup Menu”, then press the ENTER button.

• The “Speaker Setup” menu appears.

2 Press the CURSOR D or H button to select “Speaker Config.”, then press the ENTER button.

• The “Speaker Config.” screen appears.

3 Press the CURSOR D or H button to select the speaker, then press the CURSOR F or G button to select the parameter.

Center Sp.

Front Sp.

Subwoofer

Surround Sp. A

Surround back Sp.

Surround Sp. B

4

Press the ENTER button to enter the setting.

 

 

• The “Speaker Setup” menu reappears.

140