Basic Operation

HOME THX CINEMA

SURROUND PARAMETER

 

 

PURE DIRECT

CURSOR

STATUS

HOME THX

 

 

 

 

CINEMA

 

 

 

 

PURE DIRECT

DIRECT/STEREO

 

 

 

ENTER

 

DIRECT/STEREO ENTER

SURROUND BACK

 

CURSOR

SURROUND

ON SCREEN

 

 

 

PARAMETER

 

Playing audio sources (CDs and DVDs) 2 channel playback modes

The AVR-5805CI is equipped with three 2 channel playback modes exclusively for music.

Select the mode to suit your tastes.

2PURE DIRECT mode

This mode reproduces the sound with extremely high quality. The audio signals do not pass through the tone circuits, etc., and the display and surrounding circuits that could affect the audio signals are turned “OFF”.

Press the PURE DIRECT button to select the PURE DIRECT mode.

2DIRECT mode

Use this mode to achieve good quality 2 channel sound. In this mode, the audio signals bypass such circuits as the tone circuit and are transmitted directly, resulting in good quality sound.

Press the DIRECT/STEREO button to select the DIRECT mode.

The mode switches as shown below each time the DIRECT/STEREO button on the main unit is pressed.

DIRECT STEREO

When press SURROUND PARAMETER:

The subwoofer output can be controlled directly.

2STEREO mode

Use this mode to adjust the tone and achieve the desired sound.

Press the DIRECT/STEREO button to select the STEREO mode.

The system setup function cannot be used when the PURE DIRECT mode is set. To use the system setup function, cancel the PURE DIRECT mode.

If the HDMI input terminal is selected, video outputs are output in the PURE DIRECT mode.

The channel level and surround parameters in the PURE DIRECT mode are the same as in the DIRECT mode.

50