Other function

FUNCTION

DIRECT/STEREOPlaying Super Audio CDs with an IEEE1394 cable
Select the input source to which IEEE1394 was
1 assigned at the “IEEE1394 Assign” (page
107) in the system setup. Example: CD

(Main unit)

(Remote control unit)

• The IEEE1394 indicator lights.

Lights

2 Select the surround mode.Example: DIRECT

(Main unit)(Remote control unit)

3 Start playback on the selected component.

• The DSD indicator lights.

Lights

For operating instructions, refer to the component’s manual.

“DSD DIRECT” is shown on the display when playing DSD 2 channel signals in the DIRECT mode. “DSD MULTI DIRECT” is displayed when playing DSD multi- channel signals in the DIRECT mode (SB CH OUT “OFF”).

Advanced Operation

AMP

DIRECT/STEREO

ON SCREEN

FUNCTION

When playing DSD signals in the DIRECT or PURE DIRECT mode, the DSD signals are converted into analog signals. When playing in other surround modes, the DSD signals are first converted into PCM signals. The input signal and playing status can be checked by pressing the ON SCREEN button on the remote control unit.

Example: When DSD multi-channel signals are played in the DIRECT mode

Example: When DSD multi-channel signals are played in the 9CH STEREO mode

99