Basic Operation
SOURCE FUNCTION

MATER VOLUME

HOME THX CINEMA VIDEO ON/OFF
VIDEO SELECT SCALE

SURROUND SPEAKER

PHONES MONITOR SELECT ROOM EQ

Playing the input source

1

Select the input source to be played.

 

 

• The input source indicator lights.

 

Example: CD

(Main unit)

(Remote control unit)

To select the input source when ZONE2 SELECT, ZONE3/4/REC SELECT or TUNING PRESET is selected, press the SOURCE button on the main unit then operate the FUNCTION konb.

2 Start playback on the selected component.

For operating instructions, refer to the component’s manual.

3 Adjust the volume.

(Main unit)

(Remote control unit)

 

 

 

 

 

 

 

 

M.VOL. -80.0dB

The volume level is displayed on the master volume indicator.

ROOM EQ HOME THXCINEMASPEAKERVIDEO SELECT

MUTE

MATER VOLUME

 

FUNCTION

The volume can be adjusted within the range of –80.0 to +18.0 dB, in steps of 0.5 dB. However, when the

channel level is set ( page 64, 65 or 134), if the volume for any channel is set at +0.5 dB or greater, the volume cannot be adjusted up to 18.0 dB. (In this case the maximum volume adjustment range is “18.0 dB — (Maximum value of channel level)”.)

Also, you may not be able to adjust the volume to the maximum of 18.0 dB when internal volume compensation control is activated due to the combination of the surround mode and parameters, downmixing from multi-channel audio signals into two channels, etc.

2To choose the surround sound mode

Example: HOME THX CINEMA

Press the HOME THX CINEMA button.

For more information about the surround modes ( page 51 ~ 53).

2To select the Room EQ functionPress the ROOM EQ button.

For

more information about the Room EQ function

(

page 48).

44