Manuals / Brands / Home Audio / Stereo System / Denon / Home Audio / Stereo System

Denon AVR-5805CI AMP, ¢ON:, POWER, £OFF:, POWER, ENTER, ENTER, CURSOR, CURSOR, ON/STANDBY, ON/STANDBY, SYSTEM SETUP, Starting Auto Setup, Turning on the power

1 214

Download 214 pages, 13.38 Mb

Turn on your subwoofer.

Set the volume to halfway and set the crossover frequency to the maximum or Low pass filter off if your subwoofer can adjust the output volume and the crossover frequency.

Some subwoofers have a standby mode. Be sure to turn this function off before performing the Auto Setup procedure.

Turn on your TV (monitor).

Easy Setup and Operation

Turning on the power

1

2

3 Press the POWER switch.¢ON:

The power turns on and the power indicator lights. Set the POWER switch to this position to turn the power on and off from the included remote control unit.

£OFF:

The power turns off and indicator is off.

In this position, the power cannot be turned on and off from the remote control unit.

4 Press the ON/STANDBY switch on the main unit or ON button on the remote control unit.

•When pressed, the power turns on and the display lights.

•When pressed again, the power turns off, the standby mode is set and the display turns off.

The sound is muted for several seconds, after which the unit operates normally.

Whenever the ON/STANDBY button is in the standby state, the apparatus is still connected to the AC line voltage. Please be sure to turn off the POWER switch or unplug the cord when you leave home for, say, a vacation.

5 Press the AMP button to select “AMP” (only when operating with the remote control unit).

Starting Auto Setup1 Press the SYSTEM SETUP button.

• The “System Setup Menu” appears.

2 Press the CURSOR D or H button to select “Auto Setup / Room EQ”, then press the ENTER button.

• The “Auto Setup / Room EQ” menu appears.

3 Press the CURSOR D or H button to select “Auto Setup”, then press the ENTER button.

• The “Auto Setup” screen appears.

The message “Connect Microphone” is displayed if no microphone is connected. If so, connect the auto setup microphone.

•If no operation is performed for approximately 3 minutes during the auto setup procedure, the screensaver is launched. The screensaver is canceled if any one of the CURSOR, ENTER or SYSTEM SETUP button is pressed.

22

Contents

Page 2SAFETY PRECAUTIONS RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: WARNING: Page Contents Getting Started Part names and functions Easy Setup and Operation Speaker connections 2System Setup Menu Getting Started Using the Network Audio Function Advanced Operation Remote control unit Other function Accessories Before using • Store these instructions in a safe place • Moving the set •Before turning the Power operation button on Cautions on handling •Switching the input function when input terminals are not connected Muting of PRE OUT terminals and SPEAKER terminals Preparing the remote control unit Inserting the batteries Operating range of the remote control unit NOTE: Part names and functions Front panel Power ON/STANDBY button Power indicator Power switch Headphones jack (PHONES) V.AUX INPUT terminals Display q Input signal indicator w Input signal channel indicator e Information display r Output signal channel indicator Remote control unit IR segment MODE SELECTOR buttons USER MODE/SYSTEM CALL buttons Placing the speakers Connecting the speakers Connect the DVD player to the AVR-5805CI ( page 19) Easy to setup flow Easy Setup and Operation Speaker system layout 2Basic system layout (For a THX Ultra2 system) Center speaker system Front speaker systems Speaker connections 2Speaker Impedance Connecting the speaker cables Protector circuit Note on speaker impedance 2Connections Example: Front Center (A) Connecting a DVD player and TV (Monitor) TV (Monitor) Auto Setup / Room EQ at six or more points •Audyssey: •Front: •Flat: ON/STANDBY POWER SYSTEM SETUP CURSOR SETUP MIC Connecting a microphone CURSOR Turn on your subwoofer Turn on your TV (monitor) Turning on the power 3 Press the POWER switch ¢ON: Extra Setup Preliminary measurements 4 Press the CURSOR D or H button to select “Exit”, then press the ENTER button 2 Press the ENTER button 3 Check the results of the speaker detection, then press the ENTER button MASTER VOLUME Speaker system measurement Press the CURSOR D or H button to select “OK Start”, then press the CURSOR F button 2 Next the measurements for the second point will be taken Check of the measurement result 1 Press the CURSOR D or H button to select items, then press the ENTER button 5 Press the CURSOR F button 3 If the check ends, press the ENTER button again Store: About the error message Screen example Cause Measures SETUP MIC Cable indications Audio cable Video cable Audio and Video cable Signal direction Connecting Other Sources The video conversion function Cautions on the ZONE2 video conversion function: 2The analog video to HDMI conversion function: STATUS Connecting equipment with HDMI terminals [To convert analog video signals to HDMI signals] TV tuner Connecting a TV tuner Connecting a DBS tuner DBS / BS Tuner Connecting the external inputs (EXT. IN) terminals External decoder DVD-Audio-Video Super Audio CD Player Connecting a video camera or video game Connecting a DVD recorder DVD recorder Connecting a VCR Video deck Connecting a CD player CD player Connecting a turntable Turntable (MM cartridge) Connecting a CD recorder or MD recorder CD recorder Connecting a tape deck Tape deck DENON LINK connection Input signals DVD-Video DVD-Audio Super Audio 2Copyright Protection System Connecting equipment with DVI-Dterminals Connecting IEEE1394 devices 2IEEE1394 network Connecting the antenna terminals 2AM loop antenna assembly Connection of AM antennas Note to CATV system installer Connecting the XM terminal XM Mini-Tunerand Home Dock Connecting the CONTROL terminal Connecting the TRIGGER OUT terminals Connecting the MULTI ZONE terminals ZONE2 connections (ZONE2) Power amplifier (ZONE2) Connecting the pre-outterminals Connecting the power supply cord AC outlet (wall) AC OUTLETS Playback Operating the remote control unit 2Operate the this unit AMP 2AMP mode Basic Operation SOURCE FUNCTION HOME THX CINEMA VIDEO ON/OFF VIDEO SELECT SCALE PHONES MONITOR SELECT ROOM EQ Turning the sound off temporarily (MUTING) Press the MUTE button MUTE Listening over headphones Connect the headphone to the PHONES jack INPUT MODE STATUS 2Selecting the EXT. IN mode When operating the main unit: EXT. IN-1: EXT. IN-2: Press the 2Input mode indicator 2Input signal indicator Room EQ function ROOM EQ Manual: Playing modes for different sources Sources recorded in Dolby Digital Surround EX THX SURROUND EX DOLBY DIGITAL EX / +PLIIx*2 Sources recorded in DTS-ES DIRECT/STEREO ENTER THX Surround EX / Home THX Cinema mode HOME THX CINEMA 1 Press the HOME THX CINEMA button to select “Home THX Cinema” mode 2 Play a program source with the mark Playing sources recorded in Dolby Surround in the Home THX Cinema Surround mode 2Surround parameters q DECODER: •PLIIx C: •PLII C: •PL: 2Surround parameters w THX Surround EX: Ultra2 Cinema: Music Mode: Games Mode: STANDARD SURROUND PARAMETER CURSOR ENTER SURROUND BACK Dolby Digital mode and DTS Surround (only with digital input) 1 Press the STANDARD button to select “STANDARD (Dolby/DTS Surround)” mode NIGHT 2Dialogue Normalization Night mode Press the NIGHT button on the remote control unit to enter the night mode NIGHT SURROUND PARAMETER GAME STANDARDCINEMA CURSOR ENTER MUSIC Dolby Pro Logic IIx (Pro Logic II) mode 1 Press the STANDARD button to select “Dolby Pro Logic IIx” mode 5 Press the CURSOR D or H button to select the various surround parameters 6 Press the CURSOR F or G button to adjust the parameters setting Default setting: 7 Press the ENTER or SURROUND PARAMETER button to complete the setting 2Surround parameters r USER MODE STANDARD USER MODE PHONES ENTER CURSOR MUSIC DTS NEO:6 mode 1 Press the STANDARD button to select “DTS NEO:6” mode The Dolby Headphone PHONES 2 Press the CURSOR D or H button to select the parameter 3 Press the CURSOR F or G button to select the setting 4 Press the ENTER or SURROUND PARAMETER button to complete the setting DENON original surround modes Surround modes and their features SUPER STADIUM ROCK ARENA DSP SIMULATION 9CH CURSOR ENTER STEREO DSP surround simulation 1 Select the surround mode for each input channel DSP SIMULATION DSP SIMULATION 9CH STEREO 3 Press the CURSOR D or H button to select the various surround parameters 4 Press the CURSOR F or G button to adjust the parameters setting 5 Press the ENTER or SURROUND PARAMETER button to complete the setting SURROUND TONE CONTROL BACK 2Surround parameters y EFFECT: 4 Press the CURSOR G button to select “Tone Defeat OFF” 5 Press the CURSOR D or H button to select “Bass” or “Treble” 6 Press the CURSOR F or G button to set the level 7 Press the ENTER button CURSORTUNING CH SEL/ENTER BAND MODE Channel Level 1 Press the CH SEL/ENTER button Fader function 2 Press the CURSOR D , H or CH SEL/ENTER button then select “Fader” Listening to the Radio Auto tuning 1 Set the input source to “TUNER” TUNING PRESET MEMORY TUNING MODE BAND Manual tuning 4 Press the MODE button to set the manual tuning mode Checking the preset stations RDS (Radio Data System) RDS SEARCH 2Program Type (PTY) Recalling preset stations CURSOR FG RDS search 3 Press the RDS SEARCH button until “RDS SEARCH” appears on the display CURSORFG 4 Press the CHANNEL button 6 To continue searching, repeat step PTY search 3 Press the RDS SEARCH button until “PTY SEARCH” appears on the display 4 Watching the display, press the CURSOR F or Gbutton to call out the desired program type CURSOR FG BAND TUNING – TUNING – RT (Radio Text) 3 Press the RDS SEARCH button until “RT ON” appears on the display XM Satellite Radio 2ABOUT XM SATELLITE RADIO 2XM READY® LEGAL 2XM READY® SUBSCRIPTIONS Checking the XM signal strength and Radio ID BAND STATUS CURSOR ENTER TUNING Channel selection Watching the display, press the BAND button 3 to select the XM mode Direct access of channels 1 Press the SEARCH button in the XM mode 2 Press the NUMBER buttons to enter the desired channel NUMBER NUMBER Using the Network Audio Function Internet radio function 2vTuner Music server function System requirements 2Personal Computer Format Bit rate Per one minute CURSOR ENTER MEMORY 2Network settings Listening to Internet radio MEMORY BLOCK MEMORY Registering Internet radio stations in your favorites Presetting (registering) Internet radio stations MEMORY BLOCK 2Listening to preset Internet radio stations Gbutton TUNING Updating the list of radio stations 3 When “Automatic Update” is selected: Press the ENTER or CURSOR G button to select -1 “Yes” 3 When “Manual Update” is selected: Press the ENTER or CURSOR G button Playing music files stored on the computer (music server) 2Playing music files that have been preset or registered in your favorites 2Examples of web control operation screens Operating the AVR-5805CIusing a browser SELECTOR HOME Operating DENON audio components 1 Press the MODE SELECTOR button for the device to be operated 2 Operate the DENON audio component (CD, TAPE, TUNER) Advanced Operation IR segment Operating a component stored in the preset memory 2 Operate the component Setting the preset memory function 2Functions of buttons for the different devices Special remarks: Point the remote control units straight at each 5 other and press and hold in the button on the other remote control unit to be learnt on the AVR-5805CI’sremote control unit SYSTEM CALL 2Registering Press and hold the RC SETUP button for at 1 least 3 seconds Press the 9, 7, 8 button (9 → 7 → 8) in that order SYSTEM CALL MODE SELECTOR Multi zone music entertainment system ZONE2 playback 2ZONE2 5.1 channel system MAIN ZONE 9.1-channelsystem ZONE2 5.1-channelsystem 2ZONE2 7.1 channel system MAIN ZONE 7.1-channelsystem ZONE2 7.1-channelsystem 2ZONE2 STEREO/MONO system ZONE2 STEREO/MONO system ZONE3 playback 2ZONE3 STEREO/MONO system ZONE3 STEREO/MONO system ZONE4 playback 2ZONE4 STEREO/MONO system ZONE4 STEREO/MONO system FUNCTION ZONE3/4/REC SELECT ZONE2 SELECT Press the ZONE2 SELECT button to display the “ZONE2 SOURCE” on the display Turn the FUNCTION knob to select the source ON SCREEN System setup for multi-zone 1 Select the ZONE2 mode using the AMP button 2 Press the SYSTEM SETUP button 2Test Tone 2 Press the TEST TONE button USER MODE STANDARD STEREO 7CH STEREO 2Fader function ZONE2 Surround Select the surround mode for each input 2 channel 4 Press the CURSOR D or H button to select the various surround parameters 5 Press the CURSOR F or G button to adjust the parameters setting Press the CURSOR F button Press the CURSOR G button to select “Tone 5 Defeat OFF” ZONE2 tone control setting 3 Press the CURSOR D or H button to select “TONE” DIRECT/STEREO Playing Super Audio CDs with an IEEE1394 cable Select the input source to which IEEE1394 was 1 assigned at the “IEEE1394 Assign” page POWER ZONE3/4/REC SELECT STANDARD INPUTMODE PHONES DIRECT/STEREO Multi-sourcerecording / playback 2Dolby Headphone recording 2 Select the parameters and set the desired mode Last Function Memory Initialization of the Microprocessor 1 Switch off the unit using the main unit’s POWER switch Navigating through the System Setup Menu 1 Press the AMP button to select the “AMP” mode 3 Press the CURSOR D or H button to select the item you want to set, then press ENTER button Press the On screen display and front display [ Front display ] Top menu Main menu Audio Input Setup Setting the Digital In Assignment Press the ENTER button to enter the setting 2Setting the DENON LINK Gbutton to select the input signal (ANALOG, EXT. IN or IEEE1394) Setting the EXT. IN Setup Mode: •DSP: •ANALOG: S. Back: Setting the Input Function Level Setting the Function Rename Press the CURSOR D or H button to select “Input Function Lev.” at the “Audio Input “Function Rename” at the “Audio Input 5 the ENTER button Setting the IEEE1394 Assignment Press the ENTER button to enter the setting Setting the IEEE1394 Auto Function 2 Press the CURSOR F or G button to select “ON” or “OFF” Tuner Presets 2Auto Preset Memory Press the CURSOR F button to select “Yes” 2Preset Skip 4 Repeat steps 2 and 5 Press the ENTER button 2Preset Name 4 Repeat step 3 to input the preset channel name 5 Once all the characters have been input, press the ENTER button “Exit”, then press the ENTER button 9 Press the CURSOR D or H button to select “Exit”, then press the ENTER button Video Setup Setting the HDMI/DVI In Assignment MONITOR SELECT AMP: TV: Setting the Component In Assignment Setting the Video Convert Mode Setting the HDMI/Component Out Setup Analog to HDMI Convert: Scaler: •HDMI: •Component: Setting the Audio Delay Press the CURSOR F or G button to set the 2 delay time (0 ms ~ 200 ms) Setting the On Screen Display (OSD) Press the CURSOR D or H button to select “On Screen Display” at the “Video Setup” menu then press the ENTER button Function/Mode Status: Advanced Playback Setting the 2ch Direct/Stereo Press the CURSOR D or H button to select “2ch Direct / Stereo”, then press ENTER button 3 Press the CURSOR F or G button to select “Custom” Setting the Dolby Digital Setup Setting the Auto Surround Mode SCREEN Setting the Manual EQ Setup All CH: L/R CH: Each CH: 3 Press the CURSOR F or G button to select the speaker to be set 7 Press the CURSOR D or H button to select “Exit”, then press the ENTER button 2Procedure for copying the “Flat” correction curve 2 Press the CURSOR F button to select “Yes” Zone Setup (ZONE2 = 5.1/7.1ch) Setting the type of speakers for ZONE2 Setting the low frequency distribution for ZONE2 2 Press the CURSOR F or G button to select the setting LFE: Setting the Delay Time for ZONE2 4 distance between the center speaker and listening position “Delay Time” at the “Zone Setup” menu, then press the ENTER button Setting the Channel Level for ZONE2 2 Press the CURSOR F or G button to select “Auto” or “Manual” Auto: 4 When “Auto” mode is selected: 4 When “Manual” mode is selected: Setting the Video Setup for ZONE2 2Video Convert Mode (ZONE2) Setting the Crossover Frequency for ZONE2 Press the CURSOR F or G button to select the 2 frequency 2Audio Delay (ZONE2) Setting the ZONE3 and ZONE4 tone control and channel level Bass: Treble: HPF: 5 Press the CURSOR D or H button to select “Exit”, then press the ENTER button 6 Press the CURSOR D or H button to select “Exit”, then press the ENTER button 2“Zone Setup” setting when ZONE2 is set to “STEREO” or “MONO” Option Setup Setting the Channel Setup 2Channel setup flow 2The subwoofer output composition is as shown below 2Connecting the preouts Setting the Power Amplifier Assignment 2Power amplifier assignment flow Select “Advanced” Select “Adv+Front B” Select “Normal ” 2 Press the CURSOR F or G button to select the Amp Assign mode according to the speaker system you want to achieve Advanced: Adv+Front B: +Zone2: Page Page Page Setting the Volume Control Volume Limit: •–20dB, –10dB, 0 dB: Power On Level: •LAST Setting the Trigger Out If “MAIN” was selected at step 3: G button to select “ON” or “OFF” 6 Press the ENTER button Setting the AC Outlet Assignment Press the CURSOR D or H button to select “AC Outlet Assign” at the “Option Setup” menu 2 Press the CURSOR D or H button to select the AC outlet you want to set, then press the ENTER button Memory backup and protecting the setting 2User Memory Press the CURSOR F button to select “Save Yes” 2Setup Lock Setting the Network Setup 2Setting the IP Address Press the CURSOR D or H button to select “IP Address”, then press the ENTER button 3 Press the CURSOR F or G button to select “OFF” 2Setting the Proxy 2 Press the CURSOR F or G button to select “ON” the character or number Proxy: Port: TEST TONE Speaker Setup Setting the type of speakers Large: Small: None: Yes / No: 2spkrs / 1spkr: 2Assignment of low frequency signal range 2Subwoofer Setup Setting the Delay Time Preparations: Setting the Channel Level When “Manual” mode is selected: When “Auto” mode is selected: Press the CURSOR F or G button to adjust all the speakers to the same volume Setting the Crossover Frequency 2Adjusting the test tone using the remote control unit Press the TEST TONE button 2 channel level so that the volume of the test tones is the same for all the speakers 3 Press the CURSOR F or G button to select the frequency 2Setting the crossover frequency individually for the different channels 2 Press the CURSOR D or H button to select the speaker to be set Selecting the Surround Speakers for the different surround modes Gbutton to select the surround speaker A + B: Settings the THX Audio Setup 2Settings for using a THX Ultra2 compatible subwoofer When “Yes” is selected: 2Surround Back Speaker Position Settings surround back speakers ( page 142 : L11 ), then press the ENTER button L11 3 Press the CURSOR D or H button to select “Exit”, then press the ENTER button Others Setup Setting the Room EQ Setup 2 Press the CURSOR F or G button to select “All” or “Assign” All: Assign: Setting the Direct Mode Setup Setting the MIC Input Select 2 Press the CURSOR F or G button to select “Mic” or “V.AUX L” 2Specifications and Setup Procedure for Non- DENON Microphone AVR-5805CI SpeakerMicrophone power supply ex. mixer amp 120 mVrms Check the parameter Press the CURSOR D or H button to select “EQ Parameter Check”, then press the ENTER 5 Press the CURSOR D or H button to select the Equalizer curve, then press the ENTER button 6 Press the CURSOR F or G button to select the speaker channel 8 Press the CURSOR D or H button to select “Exit”, then press the ENTER button System setup items and default values (set upon shipment from the factory) Auto Setup/Room EQ Page Zone Setup Page If a problem should arise, first check the following 1.Are the connections correct 2.Have you operated the receiver according to the Operating Instructions 3.Are the speakers, and other connected components operating properly Symptom Troubleshooting Optimum surround sound for different sources 2Types of multi-channelsignals 2Types of sources •Movie audio: •Other types of audio: Additional Information Surround back speakers 2Numbers and types of surround back speakers Speaker setting examples [1]For THX Surround EX systems (using surround back speakers) qBasic setting for primarily watching movies [ As seen from above ] [ As seen from the side ] eWhen using different surround speakers for movies and music [2] When not using surround back speakers Dolby Surround [1] Dolby Digital [2] Dolby Pro Logic [3] Dolby Pro Logic 2Sources recorded in Dolby Surround DTS Digital Surround DTS-ES™ DTS-ES™Discrete 6.1: DTS-ES™Matrix 6.1: Timbre Matching™: Adaptive Decorrelation™: THX Ultra2™: THX Ultra2 Cinema: THX Music Mode: 2THX™ Surround EX™ Audyssey MultEQ XT HDCD® (High Definition Compatible Digital®) About IEEE1394 Windows Media Connect 2 Explanation for installing Windows Media About HDMI Connect vTuner Surround modes and parameters Information Additional 2Differences in surround mode names depending on the input signals Additional Information Page Page 2Audio section •Power amplifier Rated output: Dynamic power: Output terminals: Specifications 2 Tuner section [FM] [AM] Receiving Range: DVD Page Page Page DVDR Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page CABLE SATELLITE Page Page Page Page Page Page Page Page TAPE PVR TV/DVD Combination 2 TV/VCR Combination 3 DBS/PVR Combination