Denon AVR-5805CI CURSOR, Setting the Trigger Out, 6 Press the ENTER button, G button to select “ON” or “OFF”, If “MAIN” was selected at step 3:

		Advanced Setup – Part 1
	5
Setting the Trigger Out		If “MAIN” was selected at step 3:
• Four 12 V DC Trigger Outputs on the rear panel can be used		Press the CURSOR D or H button to select the
		surround mode, then press the CURSOR F or

to control other devices with compatible trigger inputs, such	G button to select “ON” or “OFF”.
as motorized screens, motorized screen masking, motorized
drapes, and other trigger-controlled devices.
	ON:
• Set the DC output supplied from the trigger out jacks for the
	If “ON” is selected when an input source set to
various input sources to “ON” or “OFF”.
	“ON” is selected, the power supplied from the
	trigger out terminal turns on.

1 Press the CURSOR D or H button to select “Trigger Out” at the “Option Setup” menu, then press the ENTER button.

• The “Trigger Out” screen appears.

OFF:

If “OFF” is selected when an input source set to “ON” is selected, the power supplied from the trigger out terminal turns off.

2 Press the CURSOR D or H button to select the trigger out terminal you want to set, then press the ENTER button.

• Switch to the setting screen.

Example: When “Trigger Out 1” is selected

6 Press the ENTER button.

• The “Trigger Out” screen reappears.

Use the same procedure to make the settings for Trigger Out 2, 3, 4.

7 Press the CURSOR D or H button to select “Exit”, then press the ENTER button.

• The “Option Setup” menu reappears.

3 Press the CURSOR F or G button to select the zone (MAIN ZONE, ZONE2, ZONE3 and ZONE4).

The power supplied from the trigger out terminal turns on and off when the power for the set zone is turned on and off.

4 Press the CURSOR D or H button to select the input source, then press the CURSOR F or G button to select “ON” or “OFF”.

ON:

When that input source is selected, the power supplied from the trigger out terminal turns on.

OFF:

When that input source is selected, the power supplied from the trigger out terminal turns off.

When “Default Yes” is selected, then press the CURSOR F button to reset to the default values.

135