Advanced Setup – Part 1

Setting the Channel Level for ZONE2

•Use this setting to adjust so that the playback level between the different channels of ZONE2 is equal.

•From the ZONE2 listening position, listen to the test tones produced from the speakers used in ZONE2 to adjust the level.

•The level can also be adjusted directly from the remote

control unit ( page 95).

1 Press the CURSOR D or H button to select “Channel Level” at the “Zone Setup” menu, then press the ENTER button.

• The “Channel Level” screen appears.

2 Press the CURSOR F or G button to select “Auto” or “Manual”.Auto:

Adjust the level while listening to the test tones produced automatically from each speaker.

Manual:

Select the speaker from which you want to produce the test tone to adjust the level.

Example: When the “Auto” mode is selected

4 When “Auto” mode is selected:

Press the CURSOR F or G button to adjust all -1the speakers to the same volume.

•The test tones are emitted from each speaker in the following order, at 4 seconds intervals the first time and second time around, 2 seconds intervals the third time around and on:

FL C FR

SW SL SR

Example: When the volume is set to –11.5 dB while the test tone is being produced from the Front L ch speaker

The volume can be adjusted between –12.0 dB and +12.0 dB in units of 0.5 dB.

4 When “Manual” mode is selected:

Press the CURSOR D or H button to select the -2speaker used in ZONE2, then press the CURSOR F or G button to adjust all the

speakers to the same volume.

Example: “Manual” mode is selected.

3 Press the CURSOR D or H button to select “Test Tone Start”, then press the CURSOR F button to select “Yes”.

5

Press the ENTER button to enter the setting.

 

 

• The “Channel Level” screen reappears.

• To cancel the settings, press the CURSOR F button to select “Level Clear” and “Yes” on the “Channel Level” screen, then make the settings again.

122