Advanced Setup – Part 1

“Color Space” and “RGB Mode Setup” are only displayed when “Analog to HDMI Convert” is set to “ON”.

When connecting to an HDCP compatible monitor equipped with DVI-D terminal using an HDMI/DVI-D converter cable, the signals are output in RGB format, regardless of the “Color Space” setting.

To view the on screen display using an HDMI monitor, set “Analog to HDMI Convert” at “HDMI/Component Out” to “ON” (default).

Set the resolution of the video output to one that is compatible with the resolution of your monitor.

When “Scaler” is set to “Component” and the video input signal includes copyright protection data, the signal is output from the component video output terminal with a resolution of 480p/576p even if “Resolution” is set to “1080i” or “720p”.

Setting the Audio Delay

Set the audio delay timing to synchronize the sound and video.

1 Press the CURSOR D or H button to select “Audio Delay” at the “Video Setup” menu, then press the ENTER button.

• The “Audio Delay” screen appears.

 

Press the CURSOR F or G button to set the
2 delay time (0 ms ~ 200 ms).

 

With a movie source, for example, adjust so that the

 

movement of the actors’ lips is synchronized with the

 

sound.

 

 

3

Press the ENTER button to enter the setting.

 

 

• The “Video Setup” menu reappears.

The audio delay setting does not apply when playing in the EXT. IN mode or in the analog input DIRECT mode or STEREO mode (only when the crossover frequency is set to “FIXED–THX–” or front speaker is set to “Large” (TONE DEFEAT “ON”, Room EQ “OFF”).

114