ZONE2 Surround

When ZONE2 is used with a 5.1 or 7.1 channel system, various surround modes can be selected according to the program source being played.

The desired sound field can be achieved by adjusting the parameters for the various surround modes.

1 Select the ZONE2 mode using the AMP button.

Select the surround mode for each input2 channel.

q STANDARD (Dolby

w DSP surround

Digital/DTS Surround)

simulation mode.

mode.

 

(Remote control unit)

(Remote control unit)

The surround mode switches in the following order each time the DSP SIMULATION button is pressed.

WIDE SCREEN SUPER STADIUM ROCK ARENA

VIRTUAL

JAZZ CLUB

MATRIX

VIDEO GAME MONO MOVIE CLASSIC CONCERT

e STEREO mode.

r 5CH/7CH STEREO

 

mode.

(Remote control unit)

(Remote control unit)

See pages 49, 54 ~ 58, 61 for a description of the features of the various surround modes.

The following surround modes can be selected in

ZONE2: STEREO, STANDARD (DOLBY/DTS SURROUND), 5/7CH STEREO, WIDE SCREEN, SUPER STADIUM, ROCK ARENA, JAZZ CLUB, CLASSIC CONCERT, MONO MOVIE, VIDEO GAME, MATRIX and VIRTUAL.

3 Press the SURROUND PARAMETER button.

• The surround parameter menu appears.

4 Press the CURSOR D or H button to select the various surround parameters.5 Press the CURSOR F or G button to adjust the parameters setting.

6 Press the ENTER or SURROUND PARAMETER button to complete the setting.

Advanced Operation

USER MODE function of ZONE2

The AVR-5805CI is equipped with a function for storing the input source, auto surround mode and input mode settings selected for the MAIN ZONE and ZONE2 in the memory so they can be used whenever desired.

For ZONE2, three patterns of settings can be stored in the memory using the USER MODE 1, 2 and 3 buttons on the Remote control unit.

See page 60 for a description of the MAIN ZONE’s “USER MODE” function.

2Storing the settings in the memory

1

Set the following to the desired status:
q ZONE2 input source
w ZONE2 auto surround mode e ZONE2 input mode2 Select the ZONE2 mode using the AMP button.

3 Press and hold the USER MODE button until the “USER 1 (2 or 3) MEMORY” is appears on the ZONE2 monitor.

2Calling the settings out

1 Select the ZONE2 mode using the AMP button.

2 Press the USER MODE button at which the settings you want to call out are stored.

97