Power amplifier

Connecting Other Sources

Connecting the pre-out terminals

Use these terminals if you wish to connect external power amplifier(s) to increase the power of the front, center, surround and surround back sound channels, or for connection to powered loudspeakers.

• When using only one surround back speaker, connect it to left channel.

A

9.1ch AUDIO IN

 

 

FRONT

L

L

L

R

R

R

B

 

 

 

 

CENTER

A

 

SURROUND B

L

L

L

 

 

R

R

R

 

 

A

 

SURROUND

 

 

BACK

L

L

L

R

R

R

A

 

SURROUND A

L

L

L

R

R

R

B

 

 

 

 

SUB-

 

 

WOOFER

By changing the MAIN ZONE channel settings, up to three subwoofers can be connected to the AVR-5805CI.

For more information about “Setting the Channel Setup” ( page 126 ~ 128).

Connecting the power supply cordAC outlet (wall)

Power supply cord

AC 120 V, 60 Hz

(Supplied)

 

AC OUTLETS

• SWITCHED (total capacity – 120 W (1 A.))

The power to these outlets is turned on and off in conjunction with the POWER switch on the main unit, and when the power is switched between on and standby from the remote control unit.

No power is supplied from these outlets when this unit’s power is at standby. Never connect equipment whose total capacity is above 120 W (1 A.)

The AC outlets can be set to turn on and off for the different functions.

For details, see “Setting the AC Outlet Assignment” ( page 136).

NOTE:

Only use the AC OUTLETS for audio equipment. Never use them for hair driers, TVs or other electrical appliances.

Insert the plugs securely. Incomplete connections will result in the generation of noise.

42