Basic Operation

2Surround parameters qDECODER:

Select the decoder to be used when playing 2 channel sources in the Home THX Cinema mode.

•PLIIx C:

The signals are decoded in the Dolby Pro Logic IIx Cinema mode before undergoing THX processing.

•PLII C:

The signals are decoded in the Dolby Pro Logic II Cinema mode before undergoing THX processing.

•PL:

The signals are decoded in the Dolby Pro Logic mode before undergoing THX processing.

•NEO:6 C:

The signals are decoded in the NEO:6 Cinema mode before undergoing THX processing.

MODE/SB CH OUT:

Select the surround back channel playback method or mode.

•ON:

This is the recommended play mode for using the surround back channel when DTS NEO:6 is selected.

•OFF:

This is the recommended play mode when Dolby Pro Logic

IIis selected. The surround back channel is not played.

2Checking the input signal

•The input signal can be checked by pressing the remote control unit’s ON SCREEN button.

SIGNAL:

Displays the type of signal (DTS, DOLBY DIGITAL, PCM, etc.).

fs:

Displays the input signal’s sampling frequency.

FORMAT:

Displays the input signal’s number of channels.

“Number of front channels/Number of surround channels/LFE on/off”

“SURROUND” is displayed for 2 channel signal sources recorded in Dolby Surround.

OFFSET:

Displays the dialog normalization offset value ( page 55).

FLAG:

Displays the special identification signal recorded in the input signal.

“MATRIX” is displayed if the input signal has undergone matrix processing, “DISCRETE” is displayed if the input signal has undergone discrete processing.

Not displayed when no identification signal is recorded.

•In addition, screen information is displayed in the following order when the ON SCREEN button is pressed repeatedly:

OSD-1

Audio input signal

OSD-2

Monitor information

OSD-3

Input/output

OSD-4

Auto surround mode

OSD-5

USER MODE 1

OSD-6

USER MODE 2

OSD-7

USER MODE 3

OSD-8~14

Tuner preset stations

NOTE:

•OSD-2:

The monitor’s resolution is displayed when an HDMI monitor is connected to the AVR-5805CI.

•OSD-4:

This is displayed when the auto surround mode is set to

“ON” ( page 117) and the input mode is set to “AUTO”.

It is not displayed when the input mode is set to “ANALOG” or “EXT. IN”.

52