Denon AVR-5805CI ENTER, Example:, Example:, listening position, press the ENTER button, Setting the Delay Time for ZONE2, 2 desired unit, “Meters” or “Feet”

			Advanced Setup – Part 1
Setting the Delay Time for ZONE2		Press the CURSOR F or G button to set the
		4 distance between the center speaker and
• This parameter is for optimizing the timing of the sound
		listening position.
produced from the various speakers and subwoofer
according to the listening position in ZONE2.		Example: When the distance is set to 10.0 feet for the
1	Press the CURSOR D or H button to select	center speaker
	“Delay Time” at the “Zone Setup” menu, then
	press the ENTER button.
	• The “Delay Time” screen appears.
		The distance changes in units of 1 foot or 0.1 foot
		each time the button is pressed. Select the value
		closest to the measured distance.
		When “Step” is selected, you can select the unit of “1
		ft (0.1 m)” or “0.1 ft (0.01 m)”.
		When “Default Yes” is selected, then press the
	Press the CURSOR F or G button to select the
		CURSOR F button to reset to the default values.
2 desired unit, “Meters” or “Feet”.		The difference of the distances set for the various

• The “Delay Time” screen appears automatically.	speakers must be 20.0 ft (6.0 m) or under. If an
	inappropriate distance is set, “RELOCATE
Example: When “Feet” is selected	BLINKING SP!” is displayed. In this case, move the
	relevant speaker to the proper position as
	indicated by the displayed value.

h

5	Press the ENTER button to enter the setting.
	• The “Zone Setup” menu reappears.
	The AVR-5805CI automatically sets the optimum
	surround delay time for the ZONE2 listening room.

3 Press the CURSOR D or H button to select the speaker to be set.

121