Others SetupSetting the Room EQ Setup

Set the Room EQ setting with All or Assign for each surround mode.

1 Press the CURSOR D or H button to select “Room EQ Setup” at the “Auto Setup / Room EQ” menu, then press the ENTER button.

• The “Room EQ Setup” screen appears.

2 Press the CURSOR F or G button to select “All” or “Assign”.All:

Sets the Equalizer for all surround modes.

Assign:

Sets the Equalizer individually for each surround mode.

3 When “All” is selected:q Press the ENTER button.

-1

• The “Select the EQ Curve” screen appears.

 

Advanced Setup – Part 2

wPress the CURSOR F or G button to select the equalizer setting.

OFF:

The Equalizer is not used.

Audyssey:

Adjusts the frequency response of all speakers to correct the effects of room acoustics.

Front:

Adjusts the frequency response of the surround speakers to match the characteristics of the front channel speakers.

Flat:

Adjusts the frequency response of all speakers to the flattest response. This mode is suitable for multi-channel music surround sound sources.

Manual:

Selects the setting value that was set in the Manual EQ Setup.

For details of the “Manual EQ Setup” ( page 118, 119).

3 When “Assign” is selected:

After completing system setup, select the -2desired equalizer setting pressing the ROOM

EQ button.

Equalizer settings for the individual surround modes can be stored in the memory.

Whenever the ROOM EQ button is pressed, the display switches as shown below.

OFF Audyssey Front

Manual Flat

4

Press the ENTER button to enter the setting.

 

 

• The “Auto Setup / Room EQ” menu reappears.

The Equalizer setting of “Audyssey”, “Front” and “Flat” can be selected after performing the Auto Setup.

When the speaker set as “None” with the Auto Setup is changed to on manually, the equalizer of “Audyssey”, “Front” and “Flat” cannot be used.

The Equalizer setting can be selected directly by ROOM EQ button.

When headphones are connected, the Room EQ cannot be used.

149