Advanced Setup – Part 1

1 Press the CURSOR D or H button to select “Power Amp Assign” at the “Option Setup” menu, then press the ENTER button.

• The “Power Amp Assign” screen appears.

2 Press the CURSOR F or G button to select theAmp Assign mode according to the speaker system you want to achieve.

Normal:

This is the recommended amplifier assignment mode. Normally select this when not conducting the power amplifier assignment.

By default, this is set to “Normal”.

Advanced:

With this mode, the power amplifiers can be assigned freely to the desired channels according to the speaker system you are using.

Adv+Front B:

With this mode, the power amplifiers can be assigned freely to the desired channels and front B.

The following modes can be selected when there are power amplifiers that are free with respect to the recommended amplifier assignment mode (“Normal”).

+Zone2:

This mode is the setting of the status in which the power amplifier is assigned to the ZONE2 output channel.

+Zone3:

This mode is the setting of the status in which the power amplifier is assigned to the ZONE3 output channel.

+Zone4:

This mode is the setting of the status in which the power amplifier is assigned to the ZONE4 output channel.

+Zone2/3:

This mode is the setting of the status in which the power amplifier is assigned simultaneously to the ZONE2 and 3 output channels.

+Zone3/4:

This mode is the setting of the status in which the power amplifier is assigned simultaneously to the ZONE3 and 4 output channels.

+Zone2/4:

This mode is the setting of the status in which the power amplifier is assigned simultaneously to the ZONE2 and 4 output channels.

+Zone2/3/4:

This mode is the setting of the status in which the power amplifier is assigned simultaneously to the ZONE2, 3 and 4 output channels.

Bi-Amp+Front:

This mode is the setting for playing the front channel with bi–amp connections.

Bi-Amp:

This mode is the setting for playing the front, center and surround channels with bi–amp connections.

When “Advanced” or “Adv+Front B” is selected, the power amplifiers can be assigned freely to the desired channels.

 

When “Advanced” or “Adv+Front B” is
3 selected:

 

Press the CURSOR D or H button to select the

 

power amplifier to be assigned, then press the

 

CURSOR F or G button to select which channel

 

to assigned the amplifier to.

 

 

4

Press the ENTER button to enter the setting.

 

 

• The “Option Setup” menu reappears.

• The amplifier assignment modes that can be selected differ according to the channel settings made at “Channel Setup”

(

page 126 ~ 128).

• The status in which power amplifiers are assigned to output channels in the different amplifier assignment modes differs according to the channel settings for the different zones

(

page 131, 132).

• If the “Advanced” or “Adv+Front B” amplifier assignment mode is selected, the channels to which power amplifiers can be assigned differ according to the channel settings for

the different zones (

page 133).

130