FUNCTION ZONE3/4/REC SELECTZONE2 SELECT

Outputting a program source to an amplifier, etc., in a ZONE2 room (ZONE2 SELECT mode)

1

Press the ZONE2 SELECT button to display the
“ZONE2 SOURCE” on the display.

 

Turn the FUNCTION knob to select the source
2 you want to output appears on the display.

3

Start playing the source to be output.

 

For operating instructions, refer to the manuals of the

respective components.

Advanced Operation

Outputting a program source to an amplifier, etc., in a ZONE3 or ZONE4 room (ZONE3, ZONE4 SELECT mode)

1 Press the ZONE3/4/REC SELECT button to display the “ZONE3 (ZONE4) SOURCE” on the display.

If the “ZONE3 SOURCE” is selected, the MULTI indicator light.

The display switches as follows each time the button is pressed.

ZONE3 ZONE4 (REC OUT)

2 Turn the FUNCTION knob to select the source you want to output appears on the display.

3 Start playing the source to be output.

For operating instructions, refer to the manuals of the respective components.

The signals of the source selected in the ZONE3 mode are also output from the VCR-1, VCR-2, VCR-3, VCR-4 and CDR/TAPE recording output terminals.

Digital signals are not output from the ZONE3 and ZONE4 audio output terminals.

About the MULTI ZONE connections ( page 88 ~ 92).

93