Enterasys Networks RBT-4102 manual Default Settings, Feature, Parameter

A

Default Settings

This appendix lists the access point system defaults.

To reset the access point defaults, refer to the CLI command “reset configuration” from the Executive level prompt.

Feature	Parameter	Default
Identification	System Name	RoamAbout AP
Administration	User Name	admin
	Password	password
	Com Port	Enabled
TCP/IP	DHCP	Enabled
	HTTP Server	Enabled
	HTTP Port	80
	HTTPS Server	Enabled
	HTTPS Port	443
	SSH Server	Enabled
	SSH Server Port	22
	IP Telnet Server	Enabled
	IP Address	192.168.1.1
	Subnet Mask	255.255.255.0
	Default Gateway	0.0.0.0
	Primary DNS Address	0.0.0.0
	Secondary DNS Address	0.0.0.0
RADIUS (Primary and	IP Address	0.0.0.0
Secondary)
	Port	1812
	Port Accounting	Disabled, 1813
	Timeout	5 seconds
	Timeout Interim	3600 seconds (one hour)
	Retransmit attempts	3

RoamAbout RBT-4102 Wireless Access Point Configuration Guide A-1