Enterasys Networks RBT-4102 manual Using the CLI to Display AP Status, Sqa

Status Information

Using the CLI to Display AP Status

To view the current access point system settings, use the show system command from the Executive mode. To view the current radio interface settings, use the show interface wireless a or show interface wireless g command.

Examples

RoamAbout.4102#show system System Information

===========================================================================

Serial Number	:	06250578210H	57 seconds
System Up time	:	0 days, 0 hours, 57 minutes,
System Name	:	RBT-4102
System Location	:	Andover
System Contact	:	SQA
Ethernet MAC Address	:	00-11-88-5A-71-D6	VAP1=00-11-88-5A-78-69
802.11a MAC Address	: Default=00-11-88-5A-78-68
		VAP2=00-11-88-5A-78-6A	VAP3=00-11-88-5A-78-6B
		VAP4=00-11-88-5A-78-6C	VAP5=00-11-88-5A-78-6D
802.11b/g MAC Address		VAP6=00-11-88-5A-78-6E	VAP7=00-11-88-5A-78-6F
	: Default=00-11-88-5A-78-60		VAP1=00-11-88-5A-78-61
		VAP2=00-11-88-5A-78-62	VAP3=00-11-88-5A-78-63
		VAP4=00-11-88-5A-78-64	VAP5=00-11-88-5A-78-65
IP Address		VAP6=00-11-88-5A-78-66	VAP7=00-11-88-5A-78-67
	: 192.168.20.55
Subnet Mask	: 255.255.255.0
Default Gateway	: 192.168.20.2
Management VLAN ID(AP):		1
IAPP State	:	ENABLED
DHCP Client	:	ENABLED
HTTP Server	:	ENABLED
HTTP Server Port	:	80
HTTPS Server	:	ENABLED
HTTPS Server Port	:	443
Slot Status	:	Dual band(a/g)
SSH Server	:	ENABLED
SSH Server Port	:	22
Telnet Server	:	ENABLED
Com Port	:	ENABLED
Software Version	:	V1.2.10

===========================================================================

RoamAbout 4102#

4-104 Advanced Configuration