Enterasys Networks RBT-4102 manual Feature, Parameter, A-2 Default Settings

Feature	Parameter	Default
CDP	CDP Auto Enable	Auto
	Hold Time	180 (seconds)
	Tx Frequency	60 (seconds)
	Port Settings	Auto
VLAN	Management VLAN	Disabled
	Management VLAN ID	1
	VLAN	Disabled
	Native VLAN	1
	Untagged VLAN ID	1
IAPP	IAPP	Enabled
Filter Control	IBSS Relay	All VAP
	Wireless AP Management	Disabled
	Ethernet Type Filter	Disabled
Rogue AP	Interface a	Disabled
	Interface b/g	Disabled
	Duration	350 (milliseconds)
	Interduration	3000 (milliseconds)
	Interval	720 (minutes)
	Authentication	Disabled
SNMP	Status	Enabled
	Community (Read Only)	public
	Community (Read/Write)	private
	Contact	contact
	Host	public (community string)
	Engine ID (SNMPv3)	Enabled
	Trap Destination	Enabled (all traps)
	Trap Destination IP Address	0.0.0.0
	Trap Destination Community	public
	Name

A-2 Default Settings