Initial Setup Using the CLI
4.Enter the following information, and click Apply.
•System Name is an alias used for the access point, enabling the device to be uniquely identified on the network. Default: RoamAbout AP. Length: 1 to 22 characters
•System Location is a text string that describes the system location. Maximum length: 253 characters
•System Contact is a text string that describes the system contact. Maximum length: 253 characters
The access point displays a Settings Saved message. Click OK.
5.To set a static IP address:
a.Click TCP/IP Settings from the menu on the left hand side of the page. The TCP/IP Settings page appears.
RoamAbout
