Enterasys Networks RBT-4102 manual CLI Commands for Configuring SNMPv3 Targets, Example

SNMP

CLI Commands for Configuring SNMPv3 Targets

To create a notification target, use the snmp‐server targets command from the CLI configuration mode. To assign a filter to a target, use the snmp‐server filter‐assignment command. To view the current SNMP targets, use the show snmp target command from the CLI Executive mode. To view filter assignment to targets, use the show snmp filter‐assignments command.

Example

RoamAbout 4102(config)#snmp-server targets mytraps 192.168.1.33 chris RoamAbout 4102(config)#snmp-server filter-assignment mytraps trapfilter RoamAbout 4102(config)#exit

RoamAbout 4102#show snmp target

Host ID	: mytraps
User	: chris
IP Address	: 192.168.1.33
UDP Port	: 162

=============================

RoamAbout 4102#show snmp filter-assignments

HostID FilterID

mytraps trapfilter

RoamAbout 4102#

CLI Commands for Configuring SNMPv3 Trap Filters

To create a notification filter, use the snmp‐server filter command from the CLI configuration mode. Use the command more than once with the same filter ID to build a filter that includes or excludes multiple MIB objects. To view the current SNMP filters, use the show snmp filter command from the CLI Executive mode.

Example

RoamAbout 4102(config)#snmp-server filter trapfilter include .1 RoamAbout 4102(config)#snmp-server filter trapfilter exclude

.1.3.6.1.2.1.2.2.1.1.23

RoamAbout 4102(config)#exit

RoamAbout 4102#show snmp filter

Filter: trapfilter

Type: include

Subtree: iso

Type: exclude

Subtree: iso.3.6.1.2.1.2.2.1.1.23

=============================

RoamAbout 4102#

4-38 Advanced Configuration