Administration
Administration
Changing the Password
Management access to the Web and CLI interface on the RBT‐4102 is controlled through a single user name and password. You can also gain additional access security by disabling the com port after configuring the AP, and using control filters (refer to “Filter Control and VLANs” on page 4‐18).
To protect access to the management interface, you should change the user name and password as soon as possible. If the user name and password are not configured, then anyone having access to the access point may be able to compromise access point and network security.
Note: Pressing the Reset button on the back of the access point for more than five seconds resets the user name and password to the factory defaults. For this reason, it is recommend that you protect the access point from physical access by unauthorized persons.
RoamAbout