System Log

Logging Level sets the severity level for event logging.

Logging Facility‐Type specifies the syslog facility to use for messages, (16 to 23) local 0 to local 7.

The system allows you to limit the messages that are logged by specifying a minimum severity level. Table 4‐4 lists the error message levels from the most severe (Emergency) to least severe (Debug). The message levels that are logged include the specified minimum level up to the Emergency level.

Table 4-4 Logging Level Descriptions

Error Level

Description

 

 

Emergency

Immediate action needed

 

 

Alerts

Immediate action needed

 

 

Critical

Critical conditions (such as, memory allocation, or free memory error - resource

 

exhausted)

 

 

Error

Error conditions (such as, invalid input, or default used)

 

 

Warning

Warning conditions (such as, return false, or unexpected return)

 

 

Notice

Normal but significant condition, such as cold start

 

 

Informational

Informational messages only

 

 

Debug

Debugging messages

 

 

Note: The access point error log can be viewed using the Event Logs window in the Status section (refer to “Using Web Management to View Event Logs” on page 4-115).The Event Logs window displays the last 128 messages logged in chronological order, from the newest to the oldest. Log messages are erased when the device is rebooted.

4-46 Advanced Configuration

Page 82
Image 82
Enterasys Networks RBT-4102 manual Logging Level Descriptions Error Level