Enterasys Networks RBT-4102 manual Example

Radio Interface

Using the CLI to Configure the 802.11a Interface Radio Settings

From the global configuration mode, enter the interface wireless a command to access the 802.11a radio interface. Set the interface SSID using the ssid command and, if required, configure a name for the interface using the description command. Use the channel command to set the radio channel.

Set any other parameters as required.

Example

RoamAbout 4102#configure

Enter configuration commands, one per line. End with CTRL/Z

RoamAbout 4102(config)#interface wireless a

Enter Wireless configuration commands, one per line.

RoamAbout 4102(if-wireless a)#description "Interface RD-AP4102"

RoamAbout 4102(if-wireless a)#ssid r&d

RoamAbout 4102(if-wireless a)#channel 40

RoamAbout 4102(if-wireless a)#secure-access

RoamAbout 4102(if-wireless a)#transmit-power full

RoamAbout 4102(if-wireless a)#speed 9

RoamAbout 4102(if-wireless a)#max-association 32

RoamAbout 4102(if-wireless a)#beacon-interval 150

RoamAbout 4102(if-wireless a)#dtim-period 5

RoamAbout 4102(if-wireless a)#fragmentation-length 512

RoamAbout 4102(if-wireless a)#rts-threshold 256

RoamAbout 4102(if-wireless a)#exit

RoamAbout 4102#

4-62 Advanced Configuration