Enterasys Networks RBT-4102 manual CLI Commands for Configuring SNMPv3 Users and Groups, Examples

SNMP

localMacAddrAuthSuccess	Enabled	pppLogonFail	Enabled
sntpServerFail	Enabled	radiusServerChanged	Enabled
systemDown	Enabled	systemUp	Enabled

=============================================

RoamAbout 4102#

CLI Commands for Configuring SNMPv3 Users and Groups

Use the snmp‐server engine‐id command to define the SNMP v3 engine before creating groups or assigning users to groups. Use the snmp‐server group command to create groups with a specific security level. Use the snmp‐server user command to create and assign users to groups. To view the current SNMP v3 engine ID, use the show snmp command.

Examples

RoamAbout	4102(config)#snmp-server engine-id 1a:2b:3c:4d:00:ff
RoamAbout	4102(config)#snmp-server group
Group Name<1-32>		:TPS

1.NoAuthNoPriv

2.AuthNoPriv

3.AuthPriv

Select the security level<1,2,3>: [1]:3

Write right<none,write, NULL> :write

RoamAbout 4102(config)#

RoamAbout 4102(config)#snmp-server user

User Name<1-32>		:chris
Group Name<1-32>		:TPS
md5(Auth) Passphrase<8-32>:a good secret
des(Priv)	Passphrase<8-32>:a very good secret
RoamAbout	4102(config)#

To view SNMP users and group settings, use the show snmp users, show snmp groups, or show snmp group‐assignments commands.

RoamAbout 4102#show snmp groups

GroupName :RO

SecurityModel :USM

SecurityLevel :NoAuthNoPriv

GroupName :TPS

SecurityModel :USM

SecurityLevel :AuthPriv

GroupName :RWAuth

SecurityModel :USM

SecurityLevel :AuthNoPriv

GroupName :RWPriv

SecurityModel :USM

SecurityLevel :AuthPriv

RoamAbout 4102#show snmp users

=============================================

UserName :chris

GroupName :TPS

AuthType :MD5

4-36 Advanced Configuration