Filter Control and VLANs
From the interface ethernet mode, use the untagged‐vlanid to specify a VLAN ID for the AP to use for untagged packets entering through the AP’s Ethernet port. Use the show interface command from the Executive mode to view untagged‐vlanid status.
RoamAbout 4102#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 4102(config)#interface ethernet
Enter Ethernet configuration commands, one per line.
RoamAbout
RoamAbout
RoamAbout 4102#show interface
Ethernet Interface Information
========================================
IP Address | : 10.2.43.203 |
Subnet Mask | : 255.255.0.0 |
Default Gateway | : 10.2.1.1 |
Primary DNS | : 134.141.93.21 |
Secondary DNS | : 134.141.79.92 |
Admin status | : Up |
Operational status | : Up |
Untagged VlanId | : 10 |
========================================
RoamAbout 4102#
RoamAbout