HP 4400C, 5400C manual To clear jams at the end of a

110 Troubleshooting and maintaining

To clear jams at the end of a page

1Remove any pages from the ADF input tray.

2Remove the input tray from the ADF.

3Gently pull the paper out of the ADF in the feeding direction (towards you).

Back to TOC

4If you still cannot remove the paper from the ADF, lift the ADF lid to its fully open position, loosen the jammed paper from the roller at the rear of the ADF lid, and pull it gently from the ADF.

5When you have successfully cleared the jam, attach the input tray and close the hatch. Press down firmly on both sides until you hear a click.

6Restack all pages and reload them into the ADF.

7On the ADF prompt on the computer, reselect any settings you had changed and click Scan To or Scan again.