| Labels |
|
|
Note | For printing labels, set the tray’s media type to LABELS in the printer |
| control panel. See Configuring input trays. When printing labels, use |
| the following guidelines: |
| z Verify that the labels’ adhesive material can tolerate temperatures |
| |
| of 190° C (374° F) for 0.1 second. |
| z Verify that there is no exposed adhesive material between the |
| labels. Exposed areas can cause labels to peel off during |
| printing, which can cause printer jams. Exposed adhesive can |
| also cause damage to printer components. |
| z Do not |
| z Verify that labels lie flat. |
| z Do not use labels that are wrinkled, bubbled, or otherwise |
| damaged. |
Heavy paper
zUse Tray 1 for paper that is heavier than 105 g/m2 (28 lb bond up to 47 lb bond).
zFor optimum results when printing on heavy paper, use the printer control panel to set the media type for the tray to HEAVY.
zIn either the software application or the driver, select Heavy as the media type, or print from a tray that is configured for heavy paper.
zBecause this setting affects all print jobs, it is important to return the printer back to its original settings once the job has printed. See Configuring input trays.
ENWW | 77 |
