Message

Description

Action

DISK FILE SYSTEM IS

The printer received a PJL file system

1. Use the HP Web

FULL

command that attempted to store

Jetadmin software to

 

something on the file system but was

delete files from the EIO

alternates with

unsuccessful because the file system

disk drive and try again.

 

is full.

2. To remove this

Ready For menus press

 

message from the

✔

 

display, turn the printer

 

 

off and then back on.

 

 

 

DISK IS WRITE

The file system device is protected

1. To enable writing to the

PROTECTED

and no new files can be written to it.

disk, turn off write

 

 

protection, using HP

alternates with

 

Web Jetadmin.

 

 

2. To remove this

Ready For menus press

 

message from the

✔

 

display, turn the printer

 

 

off and then back on.

 

 

 

Doors open. Test

A printer door has been opened

No action necessary.

aborted.

during a test. The test has been

 

 

aborted.

 

 

 

 

EIO DISK X

The EIO disk device in slot X is

No action necessary.

initializing

initializing.

 

 

 

 

EIO DISK X NOT

The EIO disk in slot X is not working

Remove the EIO disk

FUNCTIONAL For help

correctly.

from the slot indicated

press

 

and replace with a new

 

 

EIO disk drive.

 

 

 

EIO DISK X spinning up

The EIO disk device in Slot X is

No action necessary.

 

spinning up its platter.

 

 

 

 

Event log empty

SHOW EVENT LOG was selected

No action necessary.

 

from the control panel, and the event

 

 

log is empty.

 

 

 

 

FLASH DEVICE FAILURE

A device failure has occurred on the

1. Printing may continue

 

specified drive.

for jobs that do not

alternates with

 

require the Flash DIMM.

 

 

2. To remove this

Ready For menus press

 

message from the

✔

 

display, turn the printer

 

 

off and then back on.

 

 

3. If the message persists,

 

 

remove and re-install

 

 

the Flash DIMM.

 

 

4. If the message persists,

 

 

replace the Flash

 

 

DIMM.

 

 

 

Flash disk X

The new flash DIMM installed in slot

No action necessary.

initializing Do not

X is initializing.

 

power off

 

 

 

 

 

ENWW

137