Buffered data exists in the printer. Press ✔ to print the buffered data using current control panel settings and activate the new control panel settings.
Consult the network administrator to coordinate changes to printer control panel settings.
press ✔. An asterisk (*) should appear to the right of the setting.

Printer control panel problems

Control panel settings work incorrectly

Cause

Solution

The printer control panel display is blank or is not lit, even when the fan is running.

Fans may run while the printer is in standby mode (off). Press the printer’s on/off button to turn the printer on.

Printer settings in the printing software application or printer driver differ from the printer control panel settings.

Confirm that the settings in the application and printer driver are appropriate, since the application settings override the printer driver and control panel settings, and the printer driver settings override the control panel settings.

Control panel settings were not correctly saved Reselect the control panel settings and then after they were changed.

The Data indicator light is lit, and there are no pages printing.

If the printer is on a network, another user may have changed printer control panel settings.

Unable to select Tray 3 (optional 500-sheet paper feeder)

Cause

Solution

Tray 3 (500-sheet paper feeder) does not appear as an input tray option on the configuration page or on the control panel.

Tray 3 only displays as an option if it is installed. Verify correct installation of Tray 3.

Tray 3 does not appear as an option in the printer driver.

Verify that the printer driver configuration recognizes Tray 3.

180

ENWW