3.Press to select CONFIGURE DEVICE.

4.

Press

to highlight I/O.

5.

Press to select I/O.

6.

Press

to highlight EIO X (where X = 1, 2, or 3).

7.

Press to select EIO X.

8.

Press

to highlight AUTO.

9.Press to select AUTO.

10.Press the PAUSE/RESUME button to return to the READY state.

To manually configure TCP/IP parameters from the printer control panel

Use manual configuration to set an IP address, subnet mask, and local and default gateway.

Setting an IP address

 

1.

Press to enter the MENUS.

 

2.

Press

to highlight CONFIGURE DEVICE.

 

3.

Press to select CONFIGURE DEVICE.

 

4.

Press

to highlight I/O.

 

5.

Press to select I/O.

 

6.

Press

to highlight EIO X (where X = 1, 2, or 3).

 

7.

Press to select EIO X.

 

8.

Press

to highlight MANUAL.

 

9.

Press to select MANUAL.

 

10.

Press

to highlight IP ADDRESS.

 

11.

Press to select IP ADDRESS.

 

 

Note

The first of three sets of numbers is highlighted. If there is not a number

 

highlighted, a highlighted empty underscore appears.

 

12.

Press the

or

arrow to to increase or decrease the number

 

 

 

for configuring the IP address.

13.Press to move to the next set of numbers.

14.Repeat steps 12 and 13 until the correct IP address is entered.

15.Press the PAUSE/RESUME button to return to the READY state.

ENWW

49

Page 63
Image 63
HP 4600hdn 4600n manual Setting an IP address