Configuring input trays
Note
Note
The HP Color LaserJet 4600 series printer allows you to configure input trays by type and size. You can to load different media in the printer’s input trays and then request media by type or size.
If you have used previous HP LaserJet printers, you might be accustomed to configuring Tray 1 to first mode or cassette mode. To mimic the settings for first mode, configure Tray 1 for Size = ANY and Type = ANY. To mimic the settings from cassette mode, set either the size of type for Tray 1 to a setting other than ANY.
If you are duplex printing, be sure that the media loaded meets the specifications for duplex printing. (See Supported media weights and sizes.)
The instructions below are to configure the trays at the printer control panel. You can also configure the trays from your computer by accessing the embedded Web server. See Using the embedded Web server.
Configuring Tray 1 media type
1. | Press ✔ to enter the MENUS. | ||
2. | Press | to highlight PAPER HANDLING. | |
3. | Press ✔ to select PAPER HANDLING | ||
4. | Press | to highlight TRAY 1 TYPE. | |
5. | Press ✔ to select TRAY 1 TYPE. | ||
6. | Press | or | to highlight the desired media type. |
7.Press ✔ to select the media type.
8.Press PAUSE/RESUME to return to the READY state.
Configuring Tray 1 media size
1. Press ✔ to enter the MENUS.
2. Press | to highlight PAPER HANDLING. |
3. Press ✔ to select PAPER HANDLING.
4. Press | to highlight TRAY 1 SIZE |
5. Press ✔ to select TRAY 1 SIZE.
ENWW | 67 |
