Note
Note
To configure the Novell NetWare parameters from the printer control panel
1. | Press ✔ to enter the MENUS. | |
2. | Press | to highlight CONFIGURE DEVICE. |
3.Press ✔ to select CONFIGURE DEVICE.
4. | Press | to highlight I/O. |
5. | Press | ✔ to select I/O. |
6. | Press | to highlight EIO X (where X = 1, 2, or 3). |
7. | Press | ✔ to select EIO X. |
8. | Press | to highlight NOVELL. |
9. | Press | ✔ to select NOVELL. |
10. Press | to highlight FRAME. | |
11.Press ✔ to select FRAME.
12.Press the PAUSE/RESUME button to return to the ready state.
The default frame type value for the HP Color LaserJet 4600 is automatic.
Configuring TCP/IP parametersYou can use the printer control panel to configure the following TCP/IP parameters:
zusage of the BOOTP file for configuration parameters (the default is to use the BOOTP file)
zIP address (4 bytes)
zsubnet mask (4 bytes)
zdefault gateway (4 bytes)
zTCP/IP connection timeout (in seconds)
Do not disable BOOTP if you will be using RARP or DHCP to configureTCP/IP parameters.
To automatically configure TCP/IP parameters from the printer control panel
1. Press ✔ to enter the MENUS.
2. Press | to highlight CONFIGURE DEVICE. |
48 | ENWW |